Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA 😊
Printable View
Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA 😊
Torque - since I'm NOT positive about what it is I won't say .... " Moly Paste "| is what is being recommended .... there are different sources for this product .... MikeQuote:
Originally Posted by bmccaffrey
That’s what my mechanic recommended too
Found in an earlier post...............
It's a right hand thread and I would examine it, clean the splines and cover the them real good with the Moly Paste. Torque to 110 ft/lbs.
Moly paste is a lubricant. Why lube something you DO NOT want to move???
110 ft lbs with NEW Bolt.Quote:
Originally Posted by bmccaffrey
Kluber assembly paste is used on splines….acts as an insulator from metal to metal contact.
Honda has a assembly paste which I used…..cheaper$.
Amazon….search assembly paste…….Honda M77…..$20.