What did you do to your Spyder today?

[troop]

Ordered a DynoJet PV3 from Fuel Moto.

[RICZ]

Thanks Merlot. I assumed the inside threads would be the opposite of the outside ones, otherwise turning the tie rod would have no effect. You were much more helpful than the shop manual.
18mm, eh? Not many sets are sold here with that size, they jump from 17 to 19mm. The search is on for a 18mm crow foot.

[merlot]

the crows foot is also a bit fiddly to use,what with the extensions needed(most come in 3/8 inch and i dont have a lot of 3/8 extensions)

a better solution is to make one

cut down a long 1/2 extension bar to 17inches or 433mm long
cut the open end head off of combination spanner 18mm
then weld the open end head onto the extension bar,at right angles

makes a much better tool as its all in one piece

i then place a dot on top of the tie rods so i know how much i turned it(anymore than 1/2 turn on one side only will affect steering position)its easy to get it wrong so advisable to get a "proper"wheel alignment ASAP....or make your own kit and DIY

20191203_071955[1].jpg

[RICZ]

That is great information Merlot....thanks again.
All I want is to get some toe in until I can get her to a shop that does the laser alignment. She's a handful with toe out.

[PW2013STL]

I washed the road grime off from trailing it to Apache Junction, AZ. now ready for our ride today. High is going to be 67 and sunny

[ARtraveler]

I washed the road grime off from trailing it to Apache Junction, AZ. now ready for our ride today. High is going to be 67 and sunny

It's nice being in the South.

[Michaelscs]

I washed the road grime off from trailing it to Apache Junction, AZ. now ready for our ride today. High is going to be 67 and sunny

Who gets to drive?

[PW2013STL]

Both, but not at the same time

[TicketBait]

What did I do to my spyder today? .... I placed her in the for sale section, go check her out!! lots of pics!!!

[Revalden]

We went for a 100mi. ride with my son on his 2014 Triumph Trophy and my step-son on his 2007 Yamaha Virago 250. My first ride with the new exhaust system and it sounds freaking awesome. I love the deceleration rumble, and it accelerates quicker (at least it sounds quicker }. With the weather now turning to crap I'm contemplating getting the ECU flashed.

[RICZ]

My 10 yo great grandson and I installed an RLS cat delete. I had Rowan do most of it, teaching him how to use tools. He's a quick learner and loves spinning spanners.
Of course, we had to take 'er out to hear the result. A more throaty sound and just a wee bit louder. Nice! Just what I wanted and why I went with an RLS delete.
DSCN2717.jpgDSCN2713.jpg

[Revalden]

My 10 yo great grandson and I installed an RLS cat delete. I had Rowan do most of it, teaching him how to use tools. He's a quick learner and loves spinning spanners.
Of course, we had to take 'er out to hear the result. A more throaty sound and just a wee bit louder. Nice! Just what I wanted and why I went with an RLS delete.
DSCN2717.jpgDSCN2713.jpg

That's what my step-son and I just put on my 2015. with the stock muffler it was still quiet and as you said more throaty, but with the China-Akropovic muffler it sounds awesome and my wife didn't mind the sound.

[ned64]

Finally got around to putting the Baja Ron sway bar on my '17 RTL. Bout time Iv had it laying around for a year on the shelf. Now I'l see how it makes my Spyder handle in the curves.
Put a Show Chrome chrome trunk rack on wife F3L. Both very easy projects. More things to put on another day.

[Revalden]

I installed and wired in a clock and a volt meter in the dash. I'll put all the plastic back on tomorrow.

[ssmcclub]

Purchased and installed ome cross country saddle bags for my 2019 f3s price $460.00 + tax look great

[Tec35]

Installed cruise control on my F3

[Peacekeeper6]

I looked at it and drooled……

[seaweed]

I hope that you did not DROOL on it>

[MrSchaefer]

Installed the top case on my 2013 ST (video in the How To section)

Topcase_02.jpg Topcase_03.jpg Topcase_01.jpg

[ned64]

Another project done today on my spyder. Put on a Rivco Chrome Expandable Trunk-Mounted Luggage Rack on my RTL. Wife off work tomorrow so were going go riding on my RTL an her F3L

[Revalden]

Installed the top case on my 2013 ST (video in the How To section)

Topcase_02.jpg Topcase_03.jpg Topcase_01.jpg

It would look even cooler with a Scorpion Stinger sticking out of the top box.

[PMK]

Simply pushed it out of the way into driveway so other tasks could be done. Certainly needs a good scrub.

Keep checking the function of my modified rear trunk gas spring, lid opens great still.

[troop]

Put some Ride-On auto tire sealant in my new Vredestein front tires..

[bikerbillone]

Put some Ride-On auto tire sealant in my new Vredestein front tires..

All Right, I'm a Ride-On fan. I read about the laser alignment thing and wonder if Ride-On would help in the front? Just a thought, that's all.

[Flamewinger]

All Right, I'm a Ride-On fan. I read about the laser alignment thing and wonder if Ride-On would help in the front? Just a thought, that's all.

Ride-on seals and kinda balances the tires. They don’t do anything for the alignment.