-
What do you use for Cleaning and Protecting the matte bits?
Good afternoon, what does everyone with the gray matte finish use to keep it looking good. I got some Flitz Flat/Matte Finish Cleaner when I got the bike and I'm running out. Also what to use on the black flat plastic trim.
Thanks, Mike
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
Microfiber cloth and water. I used a spray bottle for the water and rolled around the bike on a wheeled mechanics stool. Easy and inexpensive. I believe there is a warning under the frunk lid telling you not to use waxes or cleaners on your matte finish..... Jim
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
-
Active Member
I used Maguiars Ultimate Black Plastic Restorer on my 2008 GS. It did a great job on certain parts - the back rest, the mud flaps...but didn't do so well on some of the other black matte finish plastic - the dash, the passenger grip bars. It seems that not all the black matte finish parts are the same plastic make-up. Has anyone else found this? What do you all use on these other areas, like the dash, grip bars, plastic covers over the steering arms? Thank you for your input!
Last edited by Peter Aawen; 04-07-2024 at 01:52 PM.
Reason: Removed Post title - they mess with Searching! ;-)
-
Back in my Jeep days, I used 303 Protectant for the fenders, hardtop, and any other plastic that was on the outside.
It's a staple for the Jeepers that like a clean vehicle after the trail riding is done.
It works well on the Spyder too!
https://www.amazon.com/303-Dust-Lint...NsaWNrPXRydWU=
--Exco
2021 RT-L only has a few cosmetic mods
-
Active Member
Chemical Guys SPI_995_16 Meticulous Matte Detailer and Spray Sealant, 16 oz, Orange, available on Amazon.
This stuff works great on my tri-black 2016 F3L
USMC RETIRED
-
I use Nu-Finish on the painted white bits and original Armor-All on everything else. Spray a little on a rag and wipe on.
Chip
2020 RTL
"Stella by Starlight"
UltraGard Full Cover, Front & Rear Cup Holders, Elka Stage 2 Rear Shock, TC & Dave Signal Button, Spyder Extras Sway Bar
-
So the original owner of my RT used spray wax on the matte finish and the black plastic. I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.
Brian
Last edited by Peter Aawen; 04-07-2024 at 01:52 PM.
Reason: Removed Post title - they mess with Searching! ;-)
-
Well, ammonia is known to cut floor wax. Try a little spot to see how it comes out. We use Mother's Back to Black on the matte black and original Armor All on the shiny black.
Chip
2020 RTL
"Stella by Starlight"
UltraGard Full Cover, Front & Rear Cup Holders, Elka Stage 2 Rear Shock, TC & Dave Signal Button, Spyder Extras Sway Bar
-
Very Active Member
Originally Posted by bsavulis
So the original owner of my RT used spray wax on the matte finish and the black plastic. I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.
Brian
Brain,
I use Chemical Guys Auto Wash for Satin-Matte finish (I have a 2023 F3 LTD Special that has a matte finish), Waterless Carwash (to wash the bike after I have gone on a ride), and Black Diamond Matte Magic Detailer from Lamonster Garage. Also, I use Chemical Guys Jet Seal Matte - Sealer + protectant which provides up to 12 months of protection.
Sorry I couldn't help you on how to get rid of the spray wax on from the original owner. Good luck!
Deanna
Last edited by Peter Aawen; 06-27-2023 at 05:41 PM.
Reason: could... ;-)
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Originally Posted by bsavulis
So the original owner of my RT used spray wax on the matte finish and the black plastic. I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.
Brian
Curious …What color 2014 had the matte finish?
Last edited by Peter Aawen; 04-07-2024 at 01:53 PM.
Reason: Removed Post title - they mess with Searching! ;-)
Love my Spyders
2016 F3L Steel Black purchased 7/16/2016 Sold 3/11/2023 (22,500 mi)
2014 RTS Circuit Yellow purchased 3/2/2018
2020 RTL Petrol Blue purchased 1/27/2023
Girls on Spyders #3195
No more 2 wheels
2020 RTL , Lamonster floor board riser Petrol Blue
-
Originally Posted by al0vely
Curious …What color 2014 had the matte finish?
It is a silver / grey color. I am not sure of the official BRP name.
-
Active Member
Originally Posted by bsavulis
So the original owner of my RT used spray wax on the matte finish and the black plastic. I have washed the trike a number of times but I can still see waxy build up on the frunk lid and a few other areas. Any advice on how to get this off. Also the black plastic is almost always grey because of this wax. I was thinking of getting it clean and then using a Cerrakote ceramic coating to keep it looking nice and clean. I am looking for any hints on how to get the bike looking better and keeping it that way.
Brian
I really like Adam's Polishes " Matte Detailer" Amazon has it for $22. My 2014 RTL is also matt grey and black. Works great !
2014 RTL bought in 3/20 with only 6,000 mi.
Came with Garmin 660
Car tires in 5/20; Elka stage 2 front shocks in 10/21
-
Member
I recently purchased a second Spyder F3-S with a black matte paint finish. I regularly detail my Porsche cars, and current Spyder with a multitude of cleaning and detailing products.
That said, I am look for the best products to clean and detail my new Spyder which has matte paint.
What are any other members utilizing to clean and detail their matte finish rides?
Last edited by Peter Aawen; 04-07-2024 at 01:54 PM.
Reason: Removed Post title - they mess with Searching! ;-)
-
After some time with Google, I ended up ordering some Meticulous Matte products from the Chemical Guys website.
One bottle is an auto wash product and the other is a detailer and sealant, both of which are specifically designed for matte finish paints.
I would avoid any power polisher or buffer tools, and do everything by hand so as not to ruin the finish.
The caveat is that I haven't had my Spyder long enough for it to need washing, so I haven't used either product yet.
racoon
Middle Tennessee
2024 CAN-AM Spyder RT Sea-to-Sky - Vegas White Satin
2023 Honda Ridgeline Sport - Sonic Grey Pearl (aka Baby Blue)
-
Very Active Member
Originally Posted by al0vely
Curious …What color 2014 had the matte finish?
Originally Posted by bsavulis
It is a silver / grey color. I am not sure of the official BRP name.
Platinum Silver Satin
Last edited by Peter Aawen; 04-07-2024 at 03:28 PM.
2005 Windveil Blue Premium Mustang Convertible
2008 Honda GL1800/California Sidecar Trike, SOLD
2014 Platinum Silver Satin Spyder RTL, SOLD
Semper Fi
-
Very Active Member
Originally Posted by racoon
After some time with Google, I ended up ordering some Meticulous Matte products from the Chemical Guys website.
One bottle is an auto wash product and the other is a detailer and sealant, both of which are specifically designed for matte finish paints.
I would avoid any power polisher or buffer tools, and do everything by hand so as not to ruin the finish.
The caveat is that I haven't had my Spyder long enough for it to need washing, so I haven't used either product yet.
HI racoon,
I use the following products from Chemical Guys: Meticulous Matte for Satin-Matte finish. This is a superior surface cleaner PH balanced-streak free formula Safe for OEM, Vinyl, and matte painted surfaces. I also use the Jet Seal matte Sealant and Paint Protectant. ( this is also from Chemical Guys.
I use the Jet Seal Matte once a year. That has a up to 12 months of protection Sharp luster finish, Advanced UV protection.
I use the above on my 2023 LTD Special Series which has a matte finish.
Deanna
Last edited by Deanna777; 04-07-2024 at 05:03 PM.
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Active Member
I use the BRP Can am stuff . It works good on the black Matt finish and it's $13.00. Just bought my 2nd bottle. I also use Meguiers detail on the rest of the bike.
Retired U.S. Coast Guard 76-97
Shad bags
Lamonsters 2.0 usb dual power plate
F3 ultimate boards
LED arc lights
Lidlox helmet extender
Lamonsters top cuff with Ram ball and phone holder.
Lamonster billet sway bar end links
BRP driver backrest
LED Volt meter
BIW Cat Delete pipe
Route 129 windscreen/ some time's
Pedal Box Pro
Spyderpops A- Arm LED Lights
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|