-
SpyderLovers Sponsor
Be Careful What You Believe!
As many of you know. I sell quite a bit on eBay. Sometimes people leave product reviews. Usually they can be helpful. Some are funny. But some can be downright bad information. Here is a feedback left regarding an oil filter kit I sell for the SM5/SE5 Can-Am Spyder.
See if you know what is so bad about this information.
'incorrect filter - ordered this filter to replace an oem filter- the oem filter had a pass-through on the top (a hole) this replacement did not. I had to drill a hole in it to use it.'
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Very Active Member
The OE filter does not have a "pass-through" . So I am guessing that what he thought was the OE filter that he removed was incorrect.
No use putting a filter in it. If you are going to drill a hole in it anyway. Could have saved a couple $.
Last edited by billybovine; 04-13-2018 at 01:02 PM.
2018 F3 LIMITED
-
Very Active Member
Your the best!!
However you can't fix stupid.
Why would you want unfiltered oil running through a hole and through your engine?
-
Active Member
It would certainly improve the flow rate!
Who needs clean oil anyway!
Tony
2012 RT-S SE5 - Viper Red
Castle Atom SV Tarmac Modular Helmets
Sena SMH5 Headsets
Ultraguard Half Cover
Hopnel Luggage: Frunk, Top Case, and Saddlebags
Big Bike Parts Short Spiral Antenna
Kumho Ecsta AST 225/50R15 Rear Tire - Got almost 18,000 miles before replacement with Riken Raptor
Vredestein Quatrac 5 165/65R-14 Front Tires
BajaRon Spark Plugs and Wires
EBC Rear Pads and Rotor from BajaRon
Riken Raptor HR 215/60-15 Rear Tire
Future Plans:
2013 Cooling Kit
BajaRon Sway Bar
High-Mount Brake Light
-
SpyderLovers Sponsor
You are all too smart! I though I'd catch someone that didn't get it.
What is a 'Pass Through' filter anyway? If the oil goes in one end and out the other without ever passing through the filter medium. What's the point?
Last edited by BajaRon; 04-13-2018 at 05:47 PM.
Shop Ph: 423-609-7588 (M-F, 8-5, Eastern Time)
Only SLOW people have to leave on time...
-
Really😲
Ahhh come on... he is using his special kind of logic...🤔 oil comes in that hole and has nowhere to get back out...seems logical if you don't know what a filter does or how it works...Interesting part is why would he do that if the OEM filter and the replacement filter are the same...
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
-
-
I must be missing something.
The 564 filter/kit on Ebay for the SE5 sure looks to be hollow as is the 556 filter I got from you last week.
Hollow as in the hole goes all the way through.
What am I missing?
-
filter
I believe the short filter is open on both ends where as the longer filter has a solid back. I hope he didn't try to put a long filter in the short canister.
-
Very Active Member
Originally Posted by ofdave
I must be missing something.
The 564 filter/kit on Ebay for the SE5 sure looks to be hollow as is the 556 filter I got from you last week.
Hollow as in the hole goes all the way through.
What am I missing?
No need to drill a hole in this end.
Filter Cap End.jpg
2018 F3 LIMITED
-
SpyderLovers Ambassador
News Flash
Now maybe, just maybe, he couldn't get the plastic off. Some filters come with tough shrink wrap. Live and learn, My 2.
ENJOY YOUR LIFE WITH A SPYDER
Ryde with a Friend and be Safe
My Spyder ..... 'Little Blue-Boy'
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|