-
Very Active Member
Anyone got torque specs for the Front sprocket?
Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA 😊
-
Very Active Member
Originally Posted by bmccaffrey
Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA
Torque - since I'm NOT positive about what it is I won't say .... " Moly Paste "| is what is being recommended .... there are different sources for this product .... Mike
-
Very Active Member
That’s what my mechanic recommended too
Trent - 2017 asphalt grey RT Limited,
Ultimate Seat, Baha Ron’s sway bar, Vredestine rear tire, Federal Formoza fronts, SlingMod’s LED head and fog lights, Lamonster’s highway pegs
HE>I
-
Found in an earlier post...............
It's a right hand thread and I would examine it, clean the splines and cover the them real good with the Moly Paste. Torque to 110 ft/lbs.
-
Moly paste is a lubricant. Why lube something you DO NOT want to move???
-
Originally Posted by bmccaffrey
Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA ��
110 ft lbs with NEW Bolt.
Kluber assembly paste is used on splines….acts as an insulator from metal to metal contact.
Honda has a assembly paste which I used…..cheaper$.
Amazon….search assembly paste…….Honda M77…..$20.
Last edited by bikerchris1270; 06-12-2022 at 07:16 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|