Can anyone point me to the location of the gas tank vent on a 2020 RT Limited? A general location is fine. I just want to take off the least amount of plastic getting to it. I will be using it to connect an aux tank. If you have a picture, even better.
Last edited by Peter Aawen; 05-12-2024 at 08:05 PM.
Reason: Removed Prefix - this is not a HowTo: DIY thread... & expanded title to briefly state the reason for the thread! ;-)
You will have to remove the passenger seat, then driver, then the panel that covers the tank & surrounds the dipstick. The lines to & from the gas tank should be visible on the right side, top. I don't have a pic of the right side showing the sending unit & lines, but here is one that shows the lines to/from the fuel vapor canister located under the side panel just inside the left sidecase release handle. Sorry for all the dust!
Hope this helps.
2020 Spyder RT Limited; Deep Marsala/Chrome
Formosa AZ01 165/50/R16's on PPA Recluse wheels up front
General Altimax RT43 215/60/R15 on factory rear Primary exhaust: RLS Cat delete w/ his baffle; secondary, custom built w/ Flowmaster HS2
Suspension: BajaRon swaybar (highly recommended!), M2 coil-overs, front & rear (also highly recomended!)
Extra LED lighting and misc. to suit my needs/wants
You will have to remove the passenger seat, then driver, then the panel that covers the tank & surrounds the dipstick. The lines to & from the gas tank should be visible on the right side, top. I don't have a pic of the right side showing the sending unit & lines, but here is one that shows the lines to/from the fuel vapor canister located under the side panel just inside the left sidecase release handle. Sorry for all the dust!
Hope this helps.
My, My, you look like you're having fun! Got her all undressed!!! Mine looked like that a couple weeks ago. Plugs, wires and an air box mod!
Where is the gas tank vent tube on '20 RT?
Reply With Quote
Originally Posted by spyderdave
Mine looked like that a couple weeks ago. Plugs, wires and an air box mod!
