That's a tough site to navigate. I just want to see photos of your installation: the front and rear cameras and the viewing screen. It would be helpful to know how and where the three are mounted.
I did the very best thing you can do with a Spyder, I took a great ride on it.
2020 RT Limited in the ultra cool Deep Marsala Dark edition.
Baja Ron Anti-Sway Bar, LED reflectors, Lamonster USB Charger (and phone mount), Can-Am Low Windshield, X-Creen Tour Variable Windscreen Spoiler Blade, Power Commander, Dilithium powered Flux Capacitor (not yet fully functional). Maintained by Lou at Pirate Powersports.
Got a link to that blog? Why not post the photos here where other Spyder owners can see them?
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
I took it out and filled it with no-ethanol 91 since the weather here is about to turn to crap. I got a call from my wife while at the gas station and as I talking to her a few people walk by and 2 young millis said they loved how my Spyder looked and couple of middies commented also. Damn, I love this thing.
2015 RTS SE6 Special Series Red/Black w/Magnesium front fenders(bought in Nov. 2018 w/9,400 miles)
Dynojet Power Commander V, Power Commander POD-300 Display, PCV Map Switch, Pedal Commander (WOW)
Passenger Arm Rests, Windshield Air Wing
Baja Ron's Sway Bar & Spring Adjusters
Air Scoops, LaMonster's Hiway Pegs
Magnetic Mirror Mounts, Air Innovations Seat Cushion
Red Chrome pin striping on Black hood
Federal Formoza AZ01 front tires (they're GREAT)
Kumho Ecsta AST KU25 All-Season Tire - 225/50R15 91H
LED bars above radiator inlets
LED brake/running/turn signals on license plate frame
Tag-Along trailer
LED headlights LED fog lights (WOW)
2" x 2" Road Lights inside front fenders
7' x 10' Cargo trailer
Garmin 396 LM GPS
RLS Cat-delete resonator with China Akropovic muffler
New Banshee AGM
M3 TPMS on front tires
Remote Control for Heated Jacket and Heated Riding Pants
Analog Clock and Analog Volt Meter
Loose Nut Behind Handlebars
I would if I could, but I can never figure out how to load pics off of my phone.
Do like I do. I send the pictures from my phone to my email, and then down load them to my computer. Then when I post I do a search under attachments and pull them onto my post.
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people...... but our benefits don't?
Waiting for my Hard collar to come off on Friday, for my cervical spine surgery, also my seat to come back from being rebuilt at Laam Custom Motorcycle Seats! Seat should get here next week! Can't wait!
USAF MSgt, Retired
2018 F3 Intense Red
Squared Away Lasar alignment, TricLED Headlights, Foglights,Safety Bundle with Turn Module, BajaRon Sway Bar,Squared Away Mirror Wedges, Stebel Air Horn, Dash Turn Indicators, TricLED USA Flag
Took the passenger seat off of our F3L to access the Customer Accessory lead and could not find it. Looked at the picture in the owners manual and it ain't where is should be, or anywhere else. Any ideas as to how to find it?
I intended to use the customer accessory wire that's supposed to be under the saddles, but it escaped off somewhere and I can't find it. That's why the fresh wire.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Took the bike in for my 28,000 miles service at 26,000 miles....I decided to do it a little earlier. I`m installing Baja Rons Tritium IX upgrade plugs. I`m interested if the upgrade plugs will increase engine performance combined with an upgraded ECU.....I`m sure it will... I`m also having the exhaust pipe wrapped. Since I already have a cat delete, the wrap should keep it cooler as well as increase the performance.
Ran wires from the fuse block I installed over the battery to the area under the saddles, in order to connect a controller for my heated jacket liner. Later, when I have the saddles customized, I will have heat put in them.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
Took the passenger seat off of our F3L to access the Customer Accessory lead and could not find it. Looked at the picture in the owners manual and it ain't where is should be, or anywhere else. Any ideas as to how to find it?
I intended to use the customer accessory wire that's supposed to be under the saddles, but it escaped off somewhere and I can't find it. That's why the fresh wire.
They use that lead to power the usb plug in the trunk, trace it back from the plug. It will say customer accessory lead. On my 19 Limited it was anyway.
They use that lead to power the usb plug in the trunk, trace it back from the plug. It will say customer accessory lead. On my 19 Limited it was anyway.
Thanks...that explains its absence. No great loss as I prefer to use my fuse block and avoid the Spyder's fussy circuitry.
Ours is a red, black and chrome 2017 F3 Limited. Bought new in 2/2019. The avatar is my first bike back in 1952, a Simplex Servi-Cycle. Photo taken at the Barber Museum.
I rode mine. Maybe the last good day here in Utah, storms and snow on the way. So I went riding. Spring City to Chester to Moroni to Mt. Pleasant to Milburn and back to Spring City. Only about 60 miles but fun and relaxing. Cold but that electric liner really works. When passing a field in Milburn I saw a flock of about 100 wild Turkeys. Very cool but no camera.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
Well it worked : click for a larger image. Its just a simple push pin but I did add a sheet metal piece ( hidden behind panel) for strength.
Lew L
Seems you utilized the alternate method I suggested by using a push pin instead of the 1/4 turn fastener. Looks good and should work very well to keep the panel from departing.
Did you install the metal doubler behind the backside panel or on top of it?
In the process of making running boards for my RT. Then, later in the week I may have to tackle the frunk to add a basic
fuse block Unless, hopefully, some one can tell me a better way!
I’m going to do a turkey trot ride today????????? 54 degrees and sunny today. Rode Bella to work and after work going to do a 120 mile ride home. You know one of those turn left cross the state line, turn left again, turn left again and cross the state line and finally turn left and end up where I started from “before” I head home......... That’s a detour! No actually I told my wife I’d pick up a some walnuts for thanksgiving and there is this really nice little Amish store some 60 miles away. Got to save a buck or two buy in bulk. By the way I think this will be close to my last ride. Nasty rain and snow tomorrow and continue into next week. Being thanksgiving weekend travel they might just put the dreaded brine liquid salt down instead of the sand and then I am done. We will see. But today I ride. It was 37 this morning on the way in watching the sun rise and what a glorious day it will be!
JCABURTO Nice picture. Look at my avatar! My sleds are greased up, loaded in the trailer, clothing washed and hanging in the trailer, helmets and communicators ready and the sleds washed and waxed ready to go too!
Getting ready for the big snow storm that starts later today. this is what I did for one of our Spyders. Now it's ready for the long tow to Arizona that we start on Friday.
2021 Sea To Sky, 2020 RTL
Isn't it weird that in AMERICA our flag and our culture offend so many people...... but our benefits don't?
Reply With Quote
Originally Posted by Lew L
.
lets see what it looks like.
's.
