• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by AZCanAm

  1. AZCanAm

    Bike won't start...

    Hi folks. I finally got around to fixing the bike. As mentioned before, I pulled the codes and got the P0335 error (crankshaft position sensor). I subsequently replaced it and all is fine. Thanks to Martin on how to pull the codes in this video at the 3:30 mark...
  2. AZCanAm

    Well....it broke.

    The bike does not need to start to view the codes.
  3. AZCanAm

    Well....it broke.

    Can you pull the codes?
  4. AZCanAm

    Engine Protection Plate - where is the screw located??

    I am appealing to my Spyder Brothers. Where on God's earth is the screw located? My manual just says to take off the screw. Trying to gain access to the "Crank Sensor".
  5. AZCanAm

    Bike won't start...

    Hi to all. Hopefully everyone is having a great time riding their Spyders. I have been very busy so I am just now getting to the bike. Here is the update: I replaced the fuel filter, drained/refilled the gas tank, and replaced the canister. Its starts but runs really bad now. I ran the codes...
  6. AZCanAm

    Bike won't start...

    I bought a 12 volts charger, a syphon hose, a funnel, a gas container, and a shop manual. Everything came in yesterday evening. The first step will be to remove all of the gas. Then re-fill 3/4 way with Chevron premium. Then attempt to start it. If that does not work, check for spark and fuel...
  7. AZCanAm

    Bike won't start...

    Great suggestion. I will add that to the list. Folks, always watch the nozzle while you are filling your tank. Thank God I was not far from home.
  8. AZCanAm

    Bike won't start...

    Indeed! Being 1/4 part Indian and 3/4 black I am already dark enough. ;)
  9. AZCanAm

    Bike won't start...

    Thanks, I will give it a try after removing some of the gas.
  10. AZCanAm

    Bike won't start...

    Sure. I will give it a try after work. Thanks.
  11. AZCanAm

    Bike won't start...

    I started with 1/4 tank of gas so I doubt it. I have used this gas station for quite some time. I will keep you posted. Very strange. I don't think it is a coincidence that something else happened at the same time but who knows?
  12. AZCanAm

    Bike won't start...

    2016 F3-S Turns over but won't start after over filling with gas. I was filling my tank at a gas station while not paying attention and looked back to see gas spilling over the side of the tank opening. I started the bike and within 20 seconds the bike starting running rough and slowly over...
  13. AZCanAm

    New owner in Arizona with some questions

    Should be a huge drop in volume. 10dB = 10% of the current volume so 7-9dB should tone her down quite a bit. You might pick up a little more torque as well with the added back pressure. Just a guess. Someone have an opinion on this?
  14. AZCanAm

    Absolutely Amazing after Installing BajaRon sway bar!

    You will be happy with this purchase for sure. Welcome to a safer more fun ride. Nice job on the install. let us know what you think when you get a chance.
  15. AZCanAm

    Goodbye old faithful

    I was feeling bad for you until I continued reading. Now I'm jealous. :congrats:
See more
Back
Top