• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. juscuz

    Limp Mode/VSS etc.

    UPDATE - - - - repaired damaged wire area where previously worn through by inner axle cap, drove approximately 2 blocks giving the wheel speed sensor time to calibrate and all is good again, no more limp mode or fault code.
  2. juscuz

    Limp Mode/VSS etc.

    Saw a box but have not attempted to remove it (cover) yet located under the passenger seat. Repaired the wire from the wheel sensor after retrieving the code (C0031) thanks to Lamont (lamonster garage's post) from WAAAY back and C006C. Will have dealer reset fault codes to see if that works...
  3. juscuz

    Limp Mode/VSS etc.

    Model is F3s which has two fuse boxes located behind frunk tub. Checked that first, all good. Shop manual refers to a REAR fuse box. It states "MAKE SURE FUSES 6 and 8 IN REAR FUSE BOX ARE GOOD". This is quoted verbatum from the 2015 F3s shop manual used by Can Am thus thought someone may...
  4. juscuz

    Limp Mode/VSS etc.

    One more day before owning my 2015 F3s for 1 year and 1,700 miles and whadda you know. Cruising along at 60 and power cut happens, get home and find a wire insulation has worn thru touching the rotating axle cap on the inside of my front wheel. ABS lights up with the limp mode, wire not broken...
  5. juscuz

    Gas cap issue...suggestions?

    Just didn't get it the first two times after refueling my f3s is all I had to do was press firmly down on the cap at the lower portion at the latch area with both thumbs until the slight click is heard. Has worked EVERYTIME since then. Before this was realized, I thought it would be necessary...
  6. juscuz

    Question on what is going to be my winter project

    This is a funny topic. Every project I plan for winter turns into a" DO IT NOW" project.
  7. juscuz

    Lamonster F3 RIP Boards in stock!

    Any new word on the RIP footboard highway brackets?
  8. juscuz

    BRP belt tensioner

    Thanks for the pic.
  9. juscuz

    BRP belt tensioner

    Waiting!!!!!
  10. juscuz

    Exhaust Pipe Springs

    Same problem with the top spring each time muffler was removed and replaced with aftermarket (two brothers racing muffler). Had purchased a 15 1/2 inch long needle nose pliers with 90 degree angle on end of nose portion from harbor freight for another project I was working on earlier. Got...
  11. juscuz

    Lamonster Garage Expanding

    Congrats! Now send me all the parts YOU know I need and YOU know I want before I know what I need and want.;)
  12. juscuz

    What Should CanAm Have made Stock ?

    Reminds me of the phrase. "PAY ME NOW OR PAY ME LATER";)
  13. juscuz

    What Should CanAm Have made Stock ?

    A lot of these suggestions make sense but then again it would take away some of the farkling fun not to mention hampering the vendors that we love sending our money. Just say'n:sour:
  14. juscuz

    F3 Fog Light Kit--Thank You LaMonster Garage

    Can you elaborate further on the E-Z lok fix for this? Where can it be purchased, etc.. Thanks
  15. juscuz

    F3 Fog Light Kit--Thank You LaMonster Garage

    I had the same thing happen after removing and reinstalling the left side panel over 10 times (doing mods). Haven't replaced the brass female thingy yet because the part on cheap cycles's pic is not clear. If you get a replacement please post up. Hopefully the entire bracket won't have to be...
  16. juscuz

    Lamonster F3 RIP Boards in stock!

    Update on brackets avail? Used R-I-P boards for the first time yesterday, I must admit, really pleased. Now all I need is the highway bracket to complete the long haul comfort level. :popcorn:
  17. juscuz

    Lamonster F3 RIP Boards in stock!

    Any release date on the highway brackets for the R-I-P running boards yet????
  18. juscuz

    Air Hawk seat pad

    I have the Airhawk R 14x14 1/2 on my 15 F3s and it does not interfere with tank. 11 x 11 is too small for driver's seat.
  19. juscuz

    Air Hawk seat pad

    Air Hawk R........
  20. juscuz

    Another happy RIP board customer

    Ordered my boards on Thursday afternoon and received them today (Sat). They are quite beefy and sharp. Will get them on in the am. Shout out to Lamonster and his crew for outstanding and quick service. Let me say again outstanding and quick service, can't beat it. I've ordered a few items...
Back
Top