• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Fvee3

    Why is this Unknown part on my Ryker's brake switch?

    Maybe it was to help the switch to open but was hanging the switch instead. Seems better without. Just read there was a recall for brake lights staying on. BRP adjusted and added the spring to satisfy a recall. I bought the Ryker new last year and didn’t know about the issue. It has just started...
  2. Fvee3

    Why is this Unknown part on my Ryker's brake switch?

    I found it because the brake light was staying on . I removed it and now the light goes off.
  3. Fvee3

    Why is this Unknown part on my Ryker's brake switch?

    Any idea why this was on my 2023 Ryker brake switch? It’s not on my 2020 Ryker.
  4. Fvee3

    Anyone modified their Ryker Front fenders for better ground clearance?

    Doesn’t seem to be any worse. Much better on the sandy dirt roads here in Jersey.
  5. Fvee3

    Anyone modified their Ryker Front fenders for better ground clearance?

    They are holding up fine. I cut them just below the brace. I used a dremel with a disk cutter.
  6. Fvee3

    2022 Ryker Rally - Rattle in Drive Shaft/Under Seat at Low RPM/Speed - any ideas?

    I own 2 Ryker Rally's, a 2020, and a 2023. Never had a sound like that on either one. For what it’s worth.
  7. Fvee3

    Spyder RS 2012 SE5 VSS failure

    I have a 2023 Ryker less than a year old; went out to ride today and discovered the battery is junk - got a VSS code then Check Key. Changed the battery, now all is good.
  8. Fvee3

    New Can Am Ryker exhaust - The RLS Exhaust Sidekick Series!

    I like it with the baffle. Sounds good without but too loud for me. I go on many long mile days and the noise gets to be much after 8hr days of riding.
  9. Fvee3

    MY '21/'22 Production Ryker Fuel pump recall; + some '19-'24 replacements!

    Thanks for the info
  10. Fvee3

    Anyone modified their Ryker Front fenders for better ground clearance?

    Let’s try this again. Don’t know what happened to that earlier photo.
  11. Fvee3

    Anyone modified their Ryker Front fenders for better ground clearance?

    Took the Rykers out today. The dirt roads were quite muddy and wet. It’s now time to shorten the front fenders. Broke the little wing on the bottom of the fender. Those things are quite low for off road and don’t really help keep water off you. I’ll post some photos after I cut them.
  12. Fvee3

    Tried to Winterize, but the weather's too good, so Still Riding!

    I don’t usually winterize my toys. There are always rideable days throughout the winter. I can usually get 80 or more miles a week through winter.
  13. Fvee3

    Electric shift with a linear actuator for a Can Am Ryker!

    That is a very good solution to the bad location of the shift. Thanks for sharing.
  14. Fvee3

    Spyder Sightings

    Spyder in Hudson, NH Riding through Hudson on Rt 111 Saturday saw a Spyder. Anyone from here?
  15. Fvee3

    New signature - now map shows States visited on Spyder!

    After reading this post I lost most of my states visited. I’ve adjusted it to show states visited on the Ryker. Looks like I have a lot of work to do.I may get to add Massachusetts, Vermont and New Hampshire this weekend.
  16. Fvee3

    Hit and run damage to a Ryker!

    Here’s the clip of the hit at about 1:36 pm https://youtu.be/BV8if-sXAlE?si=Muf4ChPMsxiXJFfT
  17. Fvee3

    Hit and run damage to a Ryker!

    Went back to the restaurant to check video. Delivery guy clipped the fender with the rear of his truck turning out of the lot. We’re going to go back with a thumb drive to copy the video the call the company.
  18. Fvee3

    Hit and run damage to a Ryker!

    I played around with some polyethylene welding rod. Seems to stick ok. I only have white so it doesn’t look great but it holds well. If this was a painted piece it would work and look good once painted. Because this is just a rough plastic piece sanding the weld kills the original plastic...
  19. Fvee3

    Hit and run damage to a Ryker!

    We talked to the bartender he didn’t have access but said he would have the owner check and let us know. Not likely anything will come from it. Cops can’t do much since it’s private property. We’ll see ordered a fender when we got home. I did pick up the pieces. I use to do a lot of plastic...
  20. Fvee3

    Hit and run damage to a Ryker!

    Great weather for a ride today we stopped for lunch and came out to find the right front fender on one of the Rykers got hit. Nobody came in to see who they hit, they just left. People suck.
Back
Top