• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. bcraig

    "Tool Kit" location?

    It's not BRP, it's your dealer. The picture shows the part number that needs ordered. https://www.can-ambrpparts.com/oemparts/p/can_am/704700168/tool-kit
  2. bcraig

    GPS Race Timer

    There is no manual, it's a free app on the App Store. I think it's probably the average.
  3. bcraig

    "Tool Kit" location?

    It was handed to me by the service manager who removed it from a folder for another Ryker. He had used the spanner from the kit to adjust the rear shock after adding my passenger seat. He showed me the spanner and told me that's what I would use from my tool kit. I told him I didn't have a tool...
  4. bcraig

    GPS Race Timer

    Just hit 200 miles today on my 600 so I thought I would do a run with the GPS Race Timer application. I did one run and the results are pictured below. Trying to understand the results. The timer 2 results for the quarter mile shows a lapse time of 18.1 seconds and shows an mph of 44. What does...
  5. bcraig

    "Tool Kit" location?

    This is the tool kit I received with my Ryker 600: ,
  6. bcraig

    Max mount & comfort passenger seat install

    Yes you will have to remove the saddlebag bracket (all three pieces). The MAX mount will replace the piece that's attached to the right side of the seat. Once you have the right side foot peg installed you can then reinstall the saddlebag bracket.
  7. bcraig

    Letter to shad, givi, etc. Saddlebags

    You would probably have to move the mounting point of the bags further back if you raise it. Otherwise the passenger's legs would probably be rubbing against the bags.
  8. bcraig

    Took Screw Out Of End Of Hand Grip - So now what?

    Remove the controls and use the index hole to spray some break free or WD40 toward the end of the handlebar. Use the spray tube attached so you can direct the spray at the bar end and give it a good spray. Let it set a few minutes and then try working it free.
  9. bcraig

    Ryker handlebar handbrake

    You're probably right. Just hard to get used to not having a handbrake to grab.
  10. bcraig

    Ryker handlebar handbrake

    Has anyone fashioned an auxiliary handbrake for the Ryker?
  11. bcraig

    New products at Spyderfest?

    Anything new released by vendors at Syderfest?
  12. bcraig

    Knock when start out from full stop

    Is it normal to have a knock in the drive train when starting out from a full stop. I read somewhere that there is "lash" associated with driveshaft bikes. Is this what I'm experiencing.
  13. bcraig

    Day trip at freeway speeds on a 600.

    So I'm curious how my 600 will handle an all day ride at freeway speeds of 65 and 70 mph. Will that be too much at high RPMs for prolonged periods? Curious how it will handle the mountains in Tennessee on I75. Will it be able to maintain the speed limit up the hills?
  14. bcraig

    2up spring kit install instructions

    Has anyone installed the 2up spring kit themselves? searched for installation instructions, but couldn't find anything. If you did it yourself was it very difficult?
  15. bcraig

    My solution for a rider's backrest

    This is what I came up with for a rider's backrest. The pad was purchased at amazon - https://www.amazon.com/gp/product/B007FZZ3R8/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1. The metal hardware from Homedepot -...
  16. bcraig

    For the Plasti Dip folks

    To my knowledge the Ryker is only a 2019 product and the model doesn't matter because they all take the same panels. There is only one red of the classic panel offered at no charge at time of purchase and that is the adrenaline red.
  17. bcraig

    For the Plasti Dip folks

    What color of Plasti Dip best matches the base OEM red panels.
  18. bcraig

    Suspension

    Following
  19. bcraig

    My solution for larger top case with passenger seat

    I'm considering that too. Hoping LaMonster Garage offers their rear rack soon.
  20. bcraig

    My solution for larger top case with passenger seat

    I was looking at that at Home Depot as well shelving hardware which is "[" shape, but a heat steel.
Back
Top