• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    AH THE TECHS ARE FINE.. SO BRP SENT A NEW MAIN HARNESS TO THE SHOP AND THEIR TECH TEAM LEADER CALLED ME.. SHOP EXPRESSED CONCERNS ABOUT INSTALLING HARNESS TIME WISE AS SHOP IS BUSY WHICH I TOTALLY UNDERSTAND TO WHEN BRP CALLED I TOLD THEM ABOUT BARBWIRED INCIDENT SOUNDS THE SAME AS...
  2. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    so brp called last night... sending new main harness now shop wont get it till Friday so another week and weekend without bike.. I have to laugh tech manager told me maybe it was my led lights causing the problem.... right on a separate circuit not spliced into any harness of the bike...
  3. JIM EVANS

    HONDA's ENTRY

    It is an am kit and not a Honda product... with regards to the lawsuit.. the time limit on that production has ended years ago.. Honda has just never made a three wheeler because they didn't want the liability.. but they now could if they wanted
  4. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    SO I NOW ALSO HAVE A NEW WIRING HARNESS IN THE BIKE AND IT IS STILL NOT CORRECTED WAITING FOR BRP TO CALL ME AND GIVE ME AN UPDATE
  5. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    just to keep folks informed bike is still in the shop going on the 6th week. it is frustrating as no one at dealership or the tech gurus at brp can figure out the problem so Friday they overnighted new coils, plugs and wires and a new wiring harness to the dealer dealer was instructed to...
  6. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    Yes in CT it does.
  7. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    30 days in shop and they still don't have a clue. New fuel pump last week now a test for internal valve issues. Cust service no help. Next week if it's not figured out either bad valves. Could mean new engine or if brp keeps dragging. Lemon law could be filed
  8. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    update so bike still in shop hopefully will get it back monday... dealer has been good BRP they need to get a handle on how to service these machines so was losing one cyln.. brp said to reprogram... was reprogrammed all fuel pressures good still losing one cyln adn running rough in...
  9. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    Still in shop brp has been good with dealer no codes ruff running. Losing one cyln. Channing plugs and wires seemed to be running a bit rich. Will see tomorrow if plugs and wires helps also hoses and emissions being gone over
  10. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    ALL SEEMS TO BE INTACT THAT I CAN SEE.. SPOKE WITH FRED RAU TODAY,, HE SAID WHEN THEY WERE TESTING THE 1330 MOTOR THIS WAS HAPPENIG ANDTHEY HAD TO DO A REFLASH OF THE ECM AND REPROGRAM IT. ITS STILL UNDER WARRANTY SO WILL DRIVE BY THE DEALER TOMORROW AND HAVE THEM HOOK IT UP AND SEE OF...
  11. JIM EVANS

    motor dies when comming to a stop. 2014 rt any suggests to try till can get to dealer

    Mine started to do it the other day. Just when going down into first. I notice the RPM dropping to 800. It won't stall of I give a quick twist of the throttle as it goes into first to keep the RPM above 900. Will have to run by the dealer next week to see if an ecm reflash will do anything. No...
  12. JIM EVANS

    hi all looking for get togethers for fun and riding

    Sat 7/2. Will meet at old American diner. RT 12 Plainfield CT. Off 395 old exit 87. Figure to leave 10 1030. Will ride to niantic for art festival. Then go somewhere for dinner. Hope to see some folks
  13. JIM EVANS

    hi all looking for get togethers for fun and riding

    SO FOLKS ANYONE WANT TO RIDE THIS WEEKEND SAT SUN AND MONDAY ALL LOOK GOOD JURIED ART SHOW AND CRAFT FAIR IN NIANTIC SAT AND SUN.. OPEN TO ANY OTHER IDEAS JIM AND LOREEN 860 334 5799
  14. JIM EVANS

    hi all looking for get togethers for fun and riding

    We will post here and on Facebook. My number is also listes
  15. JIM EVANS

    Trailer Insurance Question???

    Trailers for liability reasons are covered by the towing vehicle. If you want coverage comp and collision. It could be covered as part of your accesory coverage or as a separate rider depends on the company
  16. JIM EVANS

    Can Am Spyder baseball caps.

    I need to download the images and get our embroidery machine going again
  17. JIM EVANS

    hi all looking for get togethers for fun and riding

    OK I HAVE SPOKEN TO SKIP AND WE WERE THINKING OF GETTING TOGETHER TO TALK ABOUT GETTING FOLKS TOGETHER AND RIDING, WE HAVE COME UP WITH A FABULOUS OK NOT JUST A PLAN :) WHOEVER CAN OR WANTS TO MAKE IT WE WILL MEET ON SUNDAY JUND 26TH AT 2PM AT AJ's Pizza Restaurant · Higganum...
  18. JIM EVANS

    hi all looking for get togethers for fun and riding

    Any one want to get together this weekend
  19. JIM EVANS

    BACK FROM VACA

    JUST NEED ENOUGH ROOM TO PAINT AND PINSTRIPE AND FOR WIFE TO SET UP THE EMBROIDERY MACHINE AND TO ENGRAVE :)
  20. JIM EVANS

    BACK FROM VACA

    well will need about an 800 ft driveway... approx 30x40x12 garage building. 3000 square foot ranch and fence in about an acres for the dogs (13 at this point) then another fenced in area if we still have the alpaca and llama when we do it :)
Back
Top