• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Doc - Riverside

    changing spark plugs on 2014 rt limited

    Spark Plug removal Go to the Electrical System section of the manual then to subsection Ignition System. On page 5 of this section is the Paragraph entitled Ignition Coil Access. This will have you remove panels and the air box. Procedures to remove said same are located in a different section...
  2. Doc - Riverside

    changing spark plugs on 2014 rt limited

    Service manual Go to the link below and download the service manual for $24.50. http://brpmanuals.com/canam-spyder-manual.htm
  3. Doc - Riverside

    Magic Mirror Mounts

    Dump the Analog gauges. Unless you really love the analog gauges why not just disconnect them and go to the digital display on the screen. If you go digital both gauges have to be disconnected.
  4. Doc - Riverside

    On way to Valcourt with sick spyder. BRP Techs available at the Homecoming?

    I believe Dan is referring to the Pillion switch or as it is better known as the Passenger Butt Detector. It is a input to the VCM Module along with the wheel speed sensors.
  5. Doc - Riverside

    Meet the B.A.A.T.S System

    Belt tension By the service manual the tension is always set with rear wheel off the ground. The reason for this is that it puts the belt in a known static state ( no weight on the wheel and the bottom of the swing arm arc). If the tension is set correctly and you now put the rear wheel on...
  6. Doc - Riverside

    Anyone changed the air cleaner, cat bypass and removed baffels in a 2012 spyder rr

    It has been done Yes it can be done. I did all you mentioned to my 2010 RT plus added the air scoops and wrapped the exhaust pipes and cat converter. No fuel management needed just start it and let it idle for about 15 to 20 minutes. While it is ideling do not rev the engine.
  7. Doc - Riverside

    Meet the B.A.A.T.S System

    Belt tension Belt tension spec has always been set with the rear wheel off the ground. With the rear off the ground and the motor running and in first gear you can also align the belt. After you get it tracking correctly you adjust each side equally to bring it up to the correct tension.
  8. Doc - Riverside

    RT fog light wires

    No fog lights on EU RT's The picture you posted shows the headlights and the what we call the fog lights here in the US/Canada. Your lower lights are the lowbeams and the upper lights are the highbeams. Therefore your RT is already using the lower set of lights. What you are pointing at is the...
  9. Doc - Riverside

    Bluetooth kit on a 2016?

    Looking at the picture shows that RDO-2 connector is not installed. The square connector he shows is RDO-2 which has the signals for the XM or CB but in the case shown the connector has the 5 signals for the dongle with the purple connector connecting to the dongle harness that mounts the dongle...
  10. Doc - Riverside

    Bluetooth kit on a 2016?

    Simple fix I have a cable that will fix you up getting the Bluetooth dongle working with the square connector you have shown in the picture. Sent you a PM give me a call.
  11. Doc - Riverside

    Tether for Magic Mirrors

    This is the tether system I came up with for the mirrors. It uses 140# line doubled for a total of 280#. Used a Key chain Quick Disconnect so you can remove the mirror.
  12. Doc - Riverside

    ESI cycle produce triople play replacement bulbs

    ESI LED and Electronics for the Spyder was bought by Custom Dynamics years ago. Try there WEB Site for the part you are looking for.
  13. Doc - Riverside

    I WANT A ---- BROKEN / DAMAGED ..... RT MIRROR HOUSING

    Mirror mount I have the piece where the clips go. $50.00 plus shipping and it's yours.
  14. Doc - Riverside

    DOES ANYONE KNOW THIS ????

    KISS is the way to go The math is simple ( learned it in grade school) that is why I spelled it out for you. You could have answered the question hours ago.
  15. Doc - Riverside

    DOES ANYONE KNOW THIS ????

    Simple Measure the outside diameter of the hose. Then use a ruler to measure the wall thickness of the hose. Multiply the wall thickness by 2. Subtract the resulting wall thickness from the outside diameter and you will have the inside diameter.
  16. Doc - Riverside

    swing arm switch

    As long as you Do Not remove the bolt from the rear shock you can jack it up to get the rear tire off the ground.
  17. Doc - Riverside

    Part number

    The vent kit part number is 219800388 You can order the Vent kit from the dealer or Powersportswarehouse.com. They have it for $46.89 plus postage. The part number Bob listed is for the Heat Management Kit for the 2013 RT's ($210.00) PM me your E-mail address and I'll send you the install...
  18. Doc - Riverside

    Little light in left headlight housing is out.

    They are LEDs Small light is a round LED cluster molded into a plastic housing. Three screws and you can lift out the housing. I would do electrical checks on it because they are LEDs. Maybe the 2 pin connector came loose.
  19. Doc - Riverside

    Windshield and support frame removal RT 2014

    Remove one screw from each pin and push the pin out. Recommend wrapping a shop towel around the frame before removing the screw or pin. It will save the headache of trying to find them if dropped.
  20. Doc - Riverside

    Self Leveling Ride/Suspension?

    Fix the shock first Since you mentioned you are hearing metal to metal contact it sounds like you need a beefier rear shock. All to often people use the air bag system to hide the fact that the rear shock is failing or can't handle the load of two riders. First fix the shock so it works...
Back
Top