• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. D

    Installing new rear tire on my 2012 RT have a few questions

    I use the general altimax rt 43 ( 18-22 lbs pressure) I take off the rotor for the tire guy and put the 5 bolts on with blue loctite. No balancing. Actually have it in the garage now just too tired....I did notice that my EBC semi sintered FA473V with only 4k on them are more than 1/2...
  2. D

    Are there any good A/mkt RT Backrests?

    I like the showchrome 41-168A as it folds down and pushes me 3-4 inches forward so I'm sitting more upright...I don't use the backrest per se....it's more in my lumbar area pushing me forward...it's also got a lil pouch ...usually found for $150
  3. D

    Any way to adjust the seat release?

    I wired my seat latch with fishing leader wire from Walmart and strung it to the RH side grill just in case this problem occurs.....like last night....then I lubed it up again as I hadn't done so in a while.
  4. D

    Looking for Can-Am Dealer Transmission Repair

    The whole wiring harness...that's a lot of work for $500....hope it all goes well in your test rides!!
  5. D

    Grumbling Noise When Coming to a Stop

    I see the front sprocket dilemma posted around...Questions: My 12 RTL is part #705502137 front sprocket 28 tooth and has an additional "flywheel" that fits on the outside..so a 2 piece system which I assume the flywheel rarely needs replaced. My 2014 RTS is part # 705503239 which is a 28 tooth...
  6. D

    HowTo: Plastic Restoration Products

    I have seen using a heat gun (low) to restore Black plastic seems to work !
  7. D

    Very hard to shift into Reverse

    Try a gentle"flick" of the "-" button
  8. D

    Any a/mkt suppliers for 2014 RT-S Drive Belt????

    I see some different belt #s Drive Belt Model-RT 705501304 705501576 Are these different belts? Are there diffences on the RT belts from 2010-19? BAJARON has belts for 289$
  9. D

    alternative front tires for the Ryker

    I just did the Gen Altimax RT43 215/60/15 on the rear. PSI 17-20. No need to balance . No need to remove the brake rotor to mount. Had a local tire center mount..The front tires the Vredesteins Quadratracs 175/55R15 Tires ...there may be some mods necessary as these are a bit wider...well as far...
  10. D

    After market trailer Hitch not centered on body??

    On the pictured aftermarket hitch by the OP I'm curious ...are there plastic shims on the brackets that go over the swingarms? Or is it metal to metal?
  11. D

    Need a new belt

    BajaRon $289 for a belt shipped.
  12. D

    Opinion needed for Oil on 2016 RTS

    Mobil one full synthetic 4T racing is rated JASO MA safe for wet clutches and has significant phosphorus and zinc for wear... you can get 12 qts at walmart for like $105 ...and mobil has a rebate now that ends 8-31-21 for another $20
  13. D

    RT622 hitch slipping down while towing - is this right?

    I'm no engineer and have little to no experience but the BRP design like any mechanical device can and will be stressed with multiple factors. Any piece of equipment utilized must be examined for wear and tear. My slippage is based on a widen hitch channel that fits over one of the swing arms...
  14. D

    BRP Trailer Hitch - Plastic Shims

    Went to Adeptpowersports and yes those part #'s are showing but to the right it reveals that they no longer support or stock can am items. When using those part #s my BRP dealer states he cannot cross reference "unusable" previous #s....OMG so ridiculous....thank you for ur diligence!! Also when...
  15. D

    BRP Trailer Hitch - Plastic Shims

    I called the dealer and checked with BRP instructions and unfortunately these are not active part #s :(
  16. D

    BRP Trailer Hitch - Plastic Shims

    Hi C-man!! I tried to search those part #s you've posted to no avail....but I'll call BRP and the dealer tomorrow with those #s and see whats shaking...Thanks for the info!! Dave
  17. D

    Red dust of death on front sprocket

    Excellent-just the nudge I needed
  18. D

    BRP Trailer Hitch - Plastic Shims

    Measured shim with calipers it is .068 inch or 1/16th or 1.73 mm likely made as 2mm as these were measured with used shims ..
  19. D

    Red dust of death on front sprocket

    While on the topic of front sprockets...I did a rear tire change and with the belt off the rear sprocket I could rotate with the belt the front sprocket like 45 degrees before it stopped....I don't remember for sure but I believe it was in first gear...is that normal? Parking brake was off (not...
  20. D

    Chasing info on gas door? E-bay Part No?

    George123---how bout a lil install info....asking for a friend
Back
Top