• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. mrwog

    Are you still riding in the Northeast?

    Cold ride I was able to get in 104 miles on Fri. and 73 on Sat. between chores. I usually ride until the salt hits the roads and then I'm done. Picked up my 014 ST limited April 16th. and now have 11,235 miles on the ticker. Just took my rear tire off and for a new one, the rear is toast. Stay...
  2. mrwog

    Graphic upgrade

    Put some graphics on to break the front and rear section up just a personal touch.
  3. mrwog

    Laser alignment

    You have to find a Can Am dealer near you that does it or use one of the members that do it.
  4. mrwog

    Spyderpops bump/skid pad

    They fit in a vertical position in the front section of the install. You do not have to take the nose off the Spyder. They will bolt right up in place and fit the body angle in this area.one on either side of the inner side of the front area. I'll see if I can get a picture but maybe not since...
  5. mrwog

    Laser alignment

    And I have done both, plus spyderpops bump skid plate. And with the New England roads destroyed from this winter it has come in handy a few times already. Hit a couple of frost heaves that would have done some damage underneath with out it.
  6. mrwog

    Laser alignment

    In my best Valley Girl voice OMG...... had the alignment done today and it is such an improvement it's a completely different beast. The right front was toed out 3/4 of an inch the front left was toed out 1/16 of an inch. Now it tracks straight and corners much better, no more fighting it to...
  7. mrwog

    Spyderpops bump/skid pad

    Laying on my back is not an issue trying to find a younger friend to participate at my age is an issue...oh sorry we were speaking about the Spyder weren't we....:shocked:
  8. mrwog

    Just a rant about My ST limited tool kit.

    I get your drift but. Like I said it was just a rant, I thought it was funny to see such a sad kit on a big $ machine. I also have may many miles under my arse with 45 + years of riding. 3 round trip cross country trips a Euro alps tour and many many other trips/ride of miles racked up. In no...
  9. mrwog

    Just a rant about My ST limited tool kit.

    Yikes there is some technology for you. My phone had a mind of its own with the caps on typing. Doh.
  10. mrwog

    Just a rant about My ST limited tool kit.

    LIKE I SAID JUST A RANT. I HAVE BEEN BUILDING CARS AND BIKES FOR MORE YEARS THAN I CAN REMEMBER. AND AS SAID I TOO HAVE NOT USED A STOCK KIT BUT MAYBE A FEW TIMES. I ALWAYS FOR EVERY BIKE MAKE ONE UP one TO TAKE WHEN I GO on any lONG DISTANCE trips. AFTER THE 600 MILE CHECK ( I'LL GIVE THEM THat...
  11. mrwog

    Spyderpops bump/skid pad

    It was a straight forward install if your somewhat capable of doing your own work. I drove the front up on my 2 car ramps and this gives you enough room to do the install. If you are banged up as you say doing it this way may be a tad difficult for you. All hardware is there but you do have to...
  12. mrwog

    Just a rant about My ST limited tool kit.

    I use to restore older Brit cars and a Rolls actually has a nice tool kit. I did many old Rover cars not off road vehicles and they had a very nice kit. Rolls tool http://ts1.mm.bing.net/th?&id=JN.GaRqdVBBpcytl789sZFeXg&w=300&h=300&c=0&pid=1.9&rs=0&p=0...
  13. mrwog

    Just a rant about My ST limited tool kit.

    With a $25,000 machine one would think with the very nice build quality and overall design etc of the Spyder that they would have a much nicer tool kit. I have had MANY motorcycles of far lesser value that looked like the kit was put together by Snap-on compared the one they supply. A vesper...
  14. mrwog

    Spyderpops bump/skid pad

    Received the bump/skid plate from Spyderpops for My ST yesterday and installed it. Easy install after you figured out the mounting and such. Very well build being thicker much better design and larger to cover much more area than the OEM one. A must upgrade to any Spyder I say with the front...
  15. mrwog

    Laser alinement in the N-East

    Thanks but I'll take a shot with H&K there 20 minutes away and have done many of them.
  16. mrwog

    014 ST Limited tool kit.

    Just came from the dealer I went to order the adjustment tool and he couldn't find it so he said he would contact BRP. :duh: We looked in the F3 tool kit (has the same shocks) and there was not one in that tool kit either. One would think it would be supplied :banghead:
  17. mrwog

    Laser alinement in the N-East

    My 014 leftover right out of the crate is off, put the bars straight and you can see the right front wheel cocked to the right. After I got the joke on how to ride it with 540 miles on it and stopped counter steering and became comfy I could tell something wasn't right. it pulls to the right in...
  18. mrwog

    014 ST Limited tool kit.

    014 ST limited shocks......my Spyder
  19. mrwog

    014 ST Limited tool kit.

    The 2014 st limited has fox podium shock that are adjustable, I have already adjusted them .
  20. mrwog

    014 ST Limited tool kit.

    Thanks I have the cloth........No tool for the shocks....:>(
Back
Top