Any suggestions on a Drink carrier for the Top Case? Any 3D print options? 2020+ RT

[wcntech]

I often carry drinks in the top case. Usually they are fine but sometimes they tip over and spill. Does anyone have a suggestion for a drink carrier for the top case that I could set at least 2 drinks in that will keep them from tipping over? Any 3D print options out there?

Thanks!

 

[racoon]

I'd look for something designed for a car or truck that has a flat bottom.

I found a couple that might work by searching for: vehicle console cup holder

And maybe some velcro tape stuck to the bottoms of the holder and the top case.

 

[Bfromla]

I'd look for something designed for a car or truck that has a flat bottom.

I found a couple that might work by searching for: vehicle console cup holder

And maybe some velcro tape stuck to the bottoms of the holder and the top case.

:agree: did just that for Frunk (one of first farkles):2thumbs:lil adjustable one cod open up enough hold 64oz theater cups. Have cargo liner so just the hook side of Velcro held fine (bottom & 1 side)

 

[K80Shooter]

I use this in the frunk of my 2020 and the fit is perfect. It will hold the 16oz bottles of water with them standing up so plenty of room.

https://www.walmart.com/ip/Ozark-Tr...Blue/709693782?classType=VARIANT&athbdg=L1103

 

[JayBros]

I use a Camelbak, carryover from many years of long distance bicycling, but K80Shooter's suggestion sounds perfect. Best thing about the Camelbak, I can drink at 80 mph if I want.

 

[FrogmanDave]

I use this in the frunk of my 2020 and the fit is perfect. It will hold the 16oz bottles of water with them standing up so plenty of room.

https://www.walmart.com/ip/Ozark-Tr...Blue/709693782?classType=VARIANT&athbdg=L1103

Very good suggestion.

 

[pegasus1300]

I use this in the frunk of my 2020 and the fit is perfect. It will hold the 16oz bottles of water with them standing up so plenty of room.

https://www.walmart.com/ip/Ozark-Tr...Blue/709693782?classType=VARIANT&athbdg=L1103

somebody actually posted this several years ago, bought one and have used it for years to keep drinks cold on a trip. I also have a bag that holds a 1gal stainless steel jug from Ozark Trail that will keep ice for 2 days. I can fill it with water and using a bite valve and hose have water on demand all day. Check out Motojug.com

The picture showing it mounted on a Spyder is my jug mounted on my Spyder.