Regular Trailer Harness

[Mickay]

Hi,

Do you have any ideas how to setup the wire from the spyder rt-s to regular trailer connector ?

I have the regular box that i had on my GS but now the RT-S got one left ,one right Flasher signal, one Left , one right brake signal, Position wire, ground.

That my trailer with my old GS.

By mickay1, shot with DMC-TZ5 at 2010-04-02

 

[fastfraser]

Can't help you with your problem but-welcome

 

[NancysToy]

I purchased a BRP RT-622 trailer tongue harness (P/N 710002029), to make an adapter from the RT-S trailer connector to the connector on my aftermarket trailers. You could also purchase the proper Deutsch plug and terminal to either make an adapter or rewire your trailer. Then to just select one of the Spyder brake light terminals to operate both brake lights on the trailer, and forget about the second.

 

[retired1]

Trailer harness

From my experience, purchasing the BRP hitch is the most cost effective, since it comes with the hookup for the RTS. As of yet the harness cannot be purcchased separately. My mechanic took the harness and wired it directly to the corresponding wires on my camper trailer. I've only pulled it about 50 miles, but I've had no codes or problems show up. I'll give it a further test on the way to Cuba, mo. in a couple of weeks.welcome

 

[Ronsam]

Black beauty RT-SE5

I rode 500 miles with my tent trailer , and it work very good on the trailer mode :2thumbs: