Truck liner, glued?

[Derek Paisley]

Good morning Spyderlovers!


Quick question regarding the Trunk liner.

I had purchased and had installed the truck liner for my 2012 rss.

There looks to be portions of the liner and Rim that are glued to the trunk. Should that have been applied completely around the rim? It has since released and is so that every time I open the trunk, I now need to adjust the liner so it closes.

Here's a pic of the trunk and liner.

D

Sent from my iPad using Tapatalk HD

 

[Derek Paisley]

Sorry, the first attachment didn't work as well as I had expected.

 

[Bob Denman]

Wasn't there some velcro that held all of that in place? :dontknow:

 

[harrypottar]

I have an RT with the frunk liner and mine does the same now and again, but not all the time.

The rubber around the top comes free sometimes, I just push it back over so it tight all the way round. It normally stays in place for a few weeks.

I would no clue it as it may need to e removed at some point to get the funk off

harry

 

[Colin]

No Glue required

I have had the liner in my RS and RSS for 18 months, has not moved since I first fitted it.

 

[Derek Paisley]

Thanks for the comments!

Not sure what to do....


Sent from my iPad using Tapatalk HD

 

[rcturner]

Take it back to your dealer and have them fix it. That is their job and what you paid for.

 

[Yazz]

Take the rubber bumper off, stretch the lining over the lip of the trunk, put the rubber bumper back on making sure that the edge of the lining is showing on the outside of the trunk. The bumper will keep the lining in place.

See the elastic on the liner is below the bumper...

 

[mxz600]

I have never had my liner do that.

But as Yazz pointed out, maybe it wasn't installed properly.:dontknow: It needs to be installed as per her photo. Good luck.

Whatever you do, DON'T USE GLUE.:yikes:

 

[spydaman60]

:agree: whatever you do , don't use glue----you don't need it. i put mine in and it was quite a stretch, but it stayed in place and hasn't moved any!!!

 

[SpyderAnn01]

Mine falls off quite often. There are some velcro dots that are supposed to hold the liner in then the rubber gasket goes over it. Some of my velcro pieces have come off.