Looking for 2 things regarding floorboards

[iridenow]

Fred is a 2010 RT with a manual transmission. I would like to add some floorboards. I am looking for a spacer which will essentially raise the brake pedal. I am also looking for some boards that will fit with the manual transmission. I know these are out there. I just seem to be looking in the wrong spot. Can somebody point me in the right direction?

 

[Eviltwin]

There are still some places selling floorboards. I have Fred's brother, another 2010 RT and I made my own boards and documented them here: https://www.spyderlovers.com/forums/showthread.php?113207-New-DIY-Floorboards-Cheap-TPMS-Daylight-visible-turn-indicators-more-(Many-Pix)

If you are not handy, Inspector Gadget probably has the cheapest aftermarket set and the essentially bolt on where the rubber for the front pegs goes. https://www.spyderrt.info/can-am-rt-products

If the brake pedal is low, you may need to bleed brakes and/or look for wear on the pads. I would make sure the brakes are 100% before I started messing with the height of the pedal.

 

[iridenow]

There are still some places selling floorboards. I have Fred's brother, another 2010 RT and I made my own boards and documented them here: https://www.spyderlovers.com/forums/showthread.php?113207-New-DIY-Floorboards-Cheap-TPMS-Daylight-visible-turn-indicators-more-(Many-Pix)

If you are not handy, Inspector Gadget probably has the cheapest aftermarket set and the essentially bolt on where the rubber for the front pegs goes. https://www.spyderrt.info/can-am-rt-products

If the brake pedal is low, you may need to bleed brakes and/or look for wear on the pads. I would make sure the brakes are 100% before I started messing with the height of the pedal.

Cool. Thanks for the tip.

 

[iridenow]

There are still some places selling floorboards. I have Fred's brother, another 2010 RT and I made my own boards and documented them here: https://www.spyderlovers.com/forums/showthread.php?113207-New-DIY-Floorboards-Cheap-TPMS-Daylight-visible-turn-indicators-more-(Many-Pix)

One other thing... I would be in intensive care if I tried doing what you do here.

 

[Elwood58]

I bought floorboards for my 2012 from canamspyderaccessories dot com. I also bought a bigger brake pedal which includes a 7/8 inch riser from them.

 

[Eviltwin]

I bought floorboards for my 2012 from canamspyderaccessories dot com. I also bought a bigger brake pedal which includes a 7/8 inch riser from them.

A friend bought the version for the automatic, they were happy enough with them. Its essentially a piece of 1/4" aluminum with a line-x type paint. Reasonable at 130 for the automatic version. The version they sell for a manual is listed at 330 is crazy since its really the same thing just shaped a bit differently to allow clearance for the shifter.