Left side Trim by the mirrors with fitting issues!! Any ideas on a fix??

[beerandchips]

2020 RT. I usually am good to over react to pretty much everything, but, I'm not the most mechanically inclined person out there. My problem is the left side trim by the mirrors. The dash does not meet up correctly to the outer trim. I noticed this a few months ago but now it looks worse. Any ideas on a fix? The dealer is in Nashville, Illinois. They are a volume dealer, which means they sell every make model of vehicle no matter the brand or usage; On-Road, Off road, water, etc. To be honest, I don't know if I even trust them, because I think it was this way all along. I have NEVER bumped that side, etc. I am a fair weather rider. Maybe it's paranoia, but I think I brought it home this way in February. Anywho, please check out the pics. I hope I took them well enough to see what is going on. I hope the pics upload, I am new that this.

Steve North

- -

- -

 

[K80Shooter]

The little small plastic piece just snaps into place. Try removing it and while it's off, check for broken or missing tabs.

 

[beerandchips]

The little small plastic piece just snaps into place. Try removing it and while it's off, check for broken or missing tabs.

That trim piece does not even snap into place securely. It does not fit properly, which I think is related to the other fitment issues. I did have it off, I just forgot to include that picture.

 

[DanDanTMM]

If my Spyder was not outside in the dark double covered I would go look at it, but I am 99% sure this is the same issue I had with mine. It is not that small filler trim piece between the mirror and the dash that's the issue; the problem is up in that corner where the front (vertical) piece of the dash should be fitted over that tab in the corner that is part of the top (horizontal) dash piece. I had to pop that piece back into place correctly on the right side of my Spyder, and then everything lined up correctly.

 

[beerandchips]

If my Spyder was not outside in the dark double covered I would go look at it, but I am 99% sure this is the same issue I had with mine. It is not that small filler trim piece between the mirror and the dash that's the issue; the problem is up in that corner where the front (vertical) piece of the dash should be fitted over that tab in the corner that is part of the top (horizontal) dash piece. I had to pop that piece back into place correctly on the right side of my Spyder, and then everything lined up correctly.

I think you hit the nail on the head. I am so afraid I’m gonna break some thing. I’m just gonna have to take the mirror off so I have more leverage. Thank you for the verification.

Steve

 

[Flier Tuck]

This looks like one I saw in the dealers when I picked up my S2S. In pic #4, if you look just above the gap in the trim piece, there is a tab on the black piece that goes over the top of the dash that has not been fitted properly. Check against the other side or another 2020/21. It may be distorting something to stop you fitting the trim piece. I don't know how to fit it back in if it is that, sorry.
Regards,
Alan.

 

[cptjam]

Fear not! It snaps in. Call me - I’ll walk you thru it! Joe

 

[beerandchips]

Fear not! It snaps in. Call me - I’ll walk you thru it! Joe

Thank you. I might just take you up on the call. Several pieces on the front don't appear to be locked in place. Very frustrating for a $23,000 bike. As much as I want to LOVE this machine, I am seriously having buyers remorse and I don't want that. Check these pics out. The trim piece just behind where the frunk closes pushes down on the right side looking at the bike. It should have a tab locking it in place. Also, from the mirror back, nothing is fitting well. There's lots of gaps, and yesterday, I heard wind noises for the first time (at least that I've heard). They sounded like wind going through the holes and into the bike. That is why I investigated more. Here are the pics.t Hope they can do justice to my claims.

Thank you much.

Steve

- -

- -

 

[DanDanTMM]

I think you hit the nail on the head. I am so afraid I’m gonna break some thing. I’m just gonna have to take the mirror off so I have more leverage. Thank you for the verification.

Steve

I actually discovered mine when I was installing the LaMonster mirror locks. I used one of those plastic interior panel removal tools to help persuade it back into place. There may be better ways, but that worked for me.

 

[Doeyross]

2020 RT. I usually am good to over react to pretty much everything, but, I'm not the most mechanically inclined person out there. My problem is the left side trim by the mirrors. The dash does not meet up correctly to the outer trim. I noticed this a few months ago but now it looks worse. Any ideas on a fix? The dealer is in Nashville, Illinois. They are a volume dealer, which means they sell every make model of vehicle no matter the brand or usage; On-Road, Off road, water, etc. To be honest, I don't know if I even trust them, because I think it was this way all along. I have NEVER bumped that side, etc. I am a fair weather rider. Maybe it's paranoia, but I think I brought it home this way in February. Anywho, please check out the pics. I hope I took them well enough to see what is going on. I hope the pics upload, I am new that this.

Steve North

Where can I order that piece for the right side? I had my bike in the shop getting some Light and Sound System work done on it, and the owner's Dog bit it & the dash frames right off and chewed it all up terribly... so I’m trying to replace it. Thank you kindly.