Did they make a Riser block for 2015 RSS? Will an RT or F3 block fit?

[aka1004]

I’m looking for a Can Am riser block for a 2015 RS but all I see are just for RT's and F3's, or one that fits RS's up to 2012.
Did they make one for '13-'16 RS's?
Is it possible one for RT/F3 may fit?
Thank you in advance.

 

[IGETAROUND]

Fitting the older pre 2014 RT bars to your RS will give you about 2-3 inches of set back compared to the stock RS handlebars. Just make certain that you get the under covers for the wires, and if I remember correctly, you might need to do a small amount of trimming on the left side. They gave a much more comfortable position for my hands and forearms. Make certain that you have the correct allen wrench size to remove the bolts that hold the handlebars on, they are really tight with factory loctite.

Al in Kazoo

 

[Kcled01]

Fitting the older pre 2014 RT bars to your RS will give you about 2-3 inches of set back compared to the stock RS handlebars. Just make certain that you get the under covers for the wires, and if I remember correctly, you might need to do a small amount of trimming on the left side. They gave a much more comfortable position for my hands and forearms. Make certain that you have the correct allen wrench size to remove the bolts that hold the handlebars on, they are really tight with factory loctite.

Al in Kazoo

I have a 2014 RS SM5 and was going to have the RT bars installed at a dealership. After telling me that they would do whatever I want, their technician told them that it isn’t possible. My biggest concern about which part to order was the RT bars didn’t show a SM5 option. So I’m not sure what all I need to get for parts. I figured the RT bars, the under covers for each side and maybe hardware. Would that be all that I would need? Their parts department told me prior to this that they could order the parts but they’re not returnable on special orders. I wouldn’t want to spend $250 on parts that won’t work. I overthink a lot of things and am probably overthinking this as well. I know I’ve read on here about people having done this upgrade and need it myself so my hands quit going to sleep on me. Can’t you point me in the right direction on which parts to get and I will find someone capable of installing them. I’m not afraid of installing them myself as long as I can find all the proper torques. If you’ve made it this far into my post, thank you for your time. If you can offer some advice on what to get, thank you a million times over.

 

[Kcled01]

I found what I was looking for in DIY. Thank you anyhow though.