-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Bajaron Sway Bar
- Thread starter wengerda
- Start date
robtdonna
Member
There are numerous thread on how to do this on here. Go to the search box upper right corner and type in Bajaron sway bar.
New here. Anyone knows how to install a Bajaron swaybar? I want to order the swaybar but I am not sure who can install it. I am in Northern Virginia, and the Spyder right now is located in the warm garage of my buddy in La Plata Maryland. Help
SpyderAnn01
Active member
If you can not install it yourself you could probably get your dealer to do it for you. What year and model Spyder do you have?
trikermutha
Active member
If you are good wrenching you can do it yourself..Takes more time to take off some of the plastic under the bike..
Bob Denman
New member
:agree: For 2010 to 2012; it's easy-peasy! :thumbup:
For 2013 and later; it's about the same, but you've got to lift the bike up pretty high... :shocked:
finless
New member
Here are my videos on how to install the Baja Ron sway bar on a 2010-2012 RT.
It about the same for the 2013-2014 except you have to jack the spyder higher to get the bar in and out.
http://www.spyderlovers.com/forums/...install-the-Baja-Ron-Sway-Bar-on-a-2010-12-RT
Bob
It about the same for the 2013-2014 except you have to jack the spyder higher to get the bar in and out.
http://www.spyderlovers.com/forums/...install-the-Baja-Ron-Sway-Bar-on-a-2010-12-RT
Bob
Chupaca
New member
Depends..!
one year and model. The instruction from Ron are clear and easy to follow. The job can be done even by beginners and seeing as you have time and a warm place you should have no problem. If you have someone with a bit of mechanical experience to help its a fun project. The test ryde is the only thing you may have to wait on if the weather does not cooperate...:thumbup:
one year and model. The instruction from Ron are clear and easy to follow. The job can be done even by beginners and seeing as you have time and a warm place you should have no problem. If you have someone with a bit of mechanical experience to help its a fun project. The test ryde is the only thing you may have to wait on if the weather does not cooperate...:thumbup:
2011 Spyder RT Limited
BajaRon
Well-known member
Bob Denman
New member
:2thumbs: If you can raise the front of your bike up maybe a foot or so... it'll give you more fighting room.
Drop the skid-plate off of it, and everything will be right there in front of you. :2thumbs:
ThreeWheels
Active member
2010 and 2011 are the same. Here is a photo of my 2010. This is all I needed to install the RonBar.
Bob Denman
New member
That can't be ALL that you needed; where's the beer cooler? :shocked: :cheers:
pitzerwm
New member
I installed the Bajaron bar today. My observations: Watch all the videos and read Ron's instructions. 2011 RSS SE5, I used regular drive on lifts. I was going to add power plugs so removed the frunk. IMO, its well worth the extra time. Also, if you are going to replace the links, you will want to remove frunk AND the panels that cover the link upper bo;ts, see pix almost the only way to get the upper bolts out and back in. #8mm screw heads used a drill. Its also easier to see that you have it centered.
Attachments
Similar threads
