thereverend
Member
What is recommended to lift the 2014 RT Limited front end up to about 20 inches?
, as I am going to attempt to install Ron's sway bar...
, as I am going to attempt to install Ron's sway bar...
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Spyder Lifts or jacks?
- Thread starter thereverend
- Start date
aeroshots
New member
I used a pair of these.
http://www.amazon.com/RhinoGear-119...8&qid=1429288413&sr=8-4&keywords=plastic+ramp
For the rear two holes it was necessary to lift it another inch using a standard floor jack.
http://www.amazon.com/RhinoGear-119...8&qid=1429288413&sr=8-4&keywords=plastic+ramp
For the rear two holes it was necessary to lift it another inch using a standard floor jack.
Chupaca
New member
Depends..!
on what you have to work with. You can raise her a bit at a time one side then the other with a regular jack (bottle or sissor) and "A" stands. If your going to invest in one there are several available. The atv/motorcycle lift works well. Heres what I use...
on what you have to work with. You can raise her a bit at a time one side then the other with a regular jack (bottle or sissor) and "A" stands. If your going to invest in one there are several available. The atv/motorcycle lift works well. Heres what I use...
Attachments
Ex-Rocket
Well-known member
What is recommended to lift the 2014 RT Limited front end up to about 20 inches?
I installed the Baja Anti sway bar yesterday. I used car ramps to get under the bike to remove the panels that were necessary. But it wasn't high enough to get the old sway bar out or the new on in. So I used my motorcycle/atv lift to get it high enough. Good luck with your install. You will love the results though.
Similar threads
