• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Recent content by Hogmonster

  1. Hogmonster

    Can anyone confirm the 2021 F3-S Rear Axle Nut Size?

    I am removing the rear wheel tomorrow, from my F3, is there anything in particularly common to the Spyders I need to be aware of? I shall remove the bottom shock bolt, so I can lower the swing arm to take the tension off the belt. Anything when re fitting it? I've removed loads of motorcycle...
  2. Hogmonster

    Can anyone confirm the 2021 F3-S Rear Axle Nut Size?

    Hi, yes I prefer 6 sided sockets too, less chance of slipping or rounding corners. Thanks again for everyone's input, socket ordered.
  3. Hogmonster

    Can anyone confirm the 2021 F3-S Rear Axle Nut Size?

    Thank you guys for your helpful replies.
  4. Hogmonster

    Can anyone confirm the 2021 F3-S Rear Axle Nut Size?

    Hi All, I have tried searching for this as I'm sure it's been discussed. Can someone confirm the rear axle nut size please, my machine is in storage so it's not easy to measure it. Also do people replace the nut after removal or use loctite on it? Regards Andrew (UK).
  5. Hogmonster

    Are all F3 Front Shocks the same length from 2015 to 2021?

    Excellent thank you very much.
  6. Hogmonster

    Are all F3 Front Shocks the same length from 2015 to 2021?

    Hi, Can you tell me if all the F3-s front shocks are the same length from 2015 till 2021 please? Thank You. Andrew...
  7. Hogmonster

    Anyone else fitted one of these Handlebar Brake Conversions? Having problems setting it up, need help/advice.

    I have problems with my right hand, unfortunately the ISCI wasn't an option for me. The MTV brake system works on both the RH & LH side. I have gone for a handlebar brake system because it will make my riding experience so much easier for me. Hi 2dogs, Has your mechanic been fitting the MTV...
  8. Hogmonster

    Anyone else fitted one of these Handlebar Brake Conversions? Having problems setting it up, need help/advice.

    I have been communicating with Pali @ MTV, they are not sure what the fault is but have contacted the manafacturers. I wondered if someone on here has had the same problem. Yes he has a very good fitting video which I followed.
  9. Hogmonster

    Anyone else fitted one of these Handlebar Brake Conversions? Having problems setting it up, need help/advice.

    Hi, I have bought one of these Handlebar brake kits for my F3 HandBrake for SPYDER F3 and TUV Test Report | MartinTheVlogger https://share.google/B6wXa02gefXg2fllv Has anyone else on here fitted one? I am having problems setting it up. TIA Andrew UK.
  10. Hogmonster

    2021 Can Am Spyder F3-S - anyone know the Rear Brake Puck dimensions?

    Thanks to @TheMariner and @BajaRon for your helpful replies, I am over with the Spyder again tomorrow, I'll take some thin nosed pliers with me. The caliper is off, old pads removed, cleaned, and ready for the pads, as mentioned I neglected to check piston/puck size. In peoples opinion should...
  11. Hogmonster

    2021 Can Am Spyder F3-S - anyone know the Rear Brake Puck dimensions?

    Hi, I am in the process of fitting new rear pads to my 2021 Can Am Spyder F3-S, I know the piston winds back clockwise. I have a few different car sizes at home (my Spyder lives somewhere else) I was wondering if anyone knows the dimensions of the puck to wind the piston back, diameter, pin...
  12. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Hi TheMariner Thank you for your post @TheMariner, that is very encouraging to know someone has carried out the mod I'm thinking about doing. I have managed to locate an adjuster which is R/H & L/H thread, so I shall go with that idea. I have taps to suit both threads. Like your picture, I will...
  13. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Thank you that is very useful information. Andrew...
  14. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Thank you for the info & comments that is very helpful and good to know. Andrew...
  15. Hogmonster

    Does anyone know the internal bore size of the OE brake rod?

    Hi, I am Andrew from the UK and have a 2021 F3-S which I bought new. I have very recently purchased an MTV handlebar brake conversion kit as I have disabilities. I have a background as a motorcycle mechanic so I feel I am competent to fit it. My footrest is on position 5, to fit the brake pedal...
See more
Back
Top