Little Blue
SpyderLovers Ambassador
Still waiting for a reply.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Any idea why my Rear Shock Bolt bends in the middle?
- Thread starter RangerRick
- Start date
Mikey
Well-known member
I have read through this post a couple times and there's one thing that brings a red flag up, the OP said that he took the spring off his shock and could not press the piston in on the shock!!!!! That tells me that shock is air bound, and the reason he thinks it's bottoming out is because the shock is not working the way it was made to, and yes that would pound the neck out of the bottom bolt! Just my thoughts!
Little Blue
SpyderLovers Ambassador
That sounds like a good answer. To bad the OP has not yet reported on his findings. Oh well, we might never know.
RangerRick
Active member
Sorry, as of right now I have the stock shock back on there. I'm in the process of finding an hourglass bushing to insert on the open end of the unit that goes on the bottom of the M2 shock, so I can use the stock shock mounting tube and bolt, making it a much stronger section. First and third picture shows what I'm working with. Second picture shows Marcus' setup, had a bearing inserted in the end, and those 2 collars slipped into it on either side, but that is the weak spot and allows the bending in that spot.
- 
- 
When mounted on the bike the M2 shock functions fine, in fact when putting a zip tie around the shaft at base of upper housing, it shoved it to the bottom of the shock when hitting a big bump at speed. Hence the bent bolt on the bottom. I have a different spring on there now, I believe I do not have the damping adjusted correctly.
- - When mounted on the bike the M2 shock functions fine, in fact when putting a zip tie around the shaft at base of upper housing, it shoved it to the bottom of the shock when hitting a big bump at speed. Hence the bent bolt on the bottom. I have a different spring on there now, I believe I do not have the damping adjusted correctly.
Similar threads
