• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Freddy

    Need a Rear Shocker for 2012 Spyder RS - any suggestions?

    Try this mob too perhaps. They may have cheaper options. https://suspensionsrus.com.au/road-motorcycle/39172-elka-stage-2-rear.html When you say 'collapsed' what actually happened?
  2. Freddy

    Why you should flush your brake fluid properly

    Indeed it does. The issue is that BUDS cycles (opens & closes) the tiny solenoid valves, allowing them to be flushed too.
  3. Freddy

    Why you should flush your brake fluid properly

    Changing to DOT 5 fluid would be easy. Changing all the rubber components to suit silicone fluid wouldn't be, as they haven't been made for a Spyder.
  4. Freddy

    Why you should flush your brake fluid properly

    Like the man says: Ryde More, Worry Less!
  5. Freddy

    Why you should flush your brake fluid properly

    No. It can get in thru caliper piston seal and even thru rubber hoses.
  6. Freddy

    Why you should flush your brake fluid properly

    One of these is a good thing to have. It eliminates guessing on moisture content. Just put the 2 probes in the fluid, not the whole tip of the pen as the plastic it's made of doesn't like brake fluid - 'go figure.'...
  7. Freddy

    2008 GS ball join replacement (Easy, or a total pain?)

    :popcorn: :helpsmilie:
  8. Freddy

    2008 GS ball join replacement (Easy, or a total pain?)

    Are you certain it's the ball joints and not the inner A arm bushes - which have to be greased periodically? My GS has 103,000km and the ball joints are fine.
  9. Freddy

    Got ABS/VSS/EBD/Check Engine/Limp Mode Lights - Any suggestions?

    Example of error codes. Note the P2545. https://www.canamspyderforums.com/threads/error-code-list.2799/
  10. Freddy

    Anyone got details on the Suspension zerks needed to make them easier to use?

    The grease nipples are on the inner ends of the A arms. You must remove the frunk for access.
  11. Freddy

    Anyone got details on the Suspension zerks needed to make them easier to use?

    6mm thread. I did mine soon after I got it and grease the suspension every service. I hope yours had been greased previously - or the nylon bushes wear quickly.
  12. Freddy

    How reliable are spyders?

    Reliability and quality ain't Spyder's strongest suits. It meets a niche market - folks like you and me. Many folks haven't got what they paid for, many have. Do more research.
  13. Freddy

    Which belt guard is more important - top, or both?

    Here's the one I made of sheet metal. It's attached to the lower shocky bolt with a Z shaped bracket on the right and the left side is glued to the swing arm. It's still there after 13 years. I run a 205/55-15 tyre. The slightly narrower tyre give some clearance for the aftermarket inner...
  14. Freddy

    Which belt guard is more important - top, or both?

    Get both - it needs em. This was 2 weeks old and before I fitted an inner guard.
  15. Freddy

    Sprocket Final Fix Update from Shawn Smoak

    LOCTITE® 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets...
  16. Freddy

    Sprocket Final Fix Update from Shawn Smoak

    LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional...
  17. Freddy

    Sprocket Final Fix Update from Shawn Smoak

    BRP must have read some of my old posts. :ohyea: https://www.spyderlovers.com/forums/showthread.php?122050-Front-Sprocket-Spline-Failures/page2&highlight=loctite+660
  18. Freddy

    A Message for the Moderators

    Touche! :clap:
  19. Freddy

    A Message for the Moderators

    It's a fact that some folks haven't got what they paid for when they bought a new Spyder. It's great that owners share their good and bad experiences. This is what makes this forum so valuable.
  20. Freddy

    Saw this FS on Ebay

    BajaRon asks: why did they go to a dual flange? He musta forgot that there were cases early on where the belt was so far out of alignment that it cut into the transmission case. 'Correctly' being the operative word.
Back
Top