• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. bjt

    Paintable surface area

    :dontknow:
  2. bjt

    Numb fingers: Risers?

    Its no worse than having black front rims and a gray rear rim or a silver rear rack and passenger backrest on a yellow Spyder. :D
  3. bjt

    Brake bleeding

    My brakes were soft like that also. My brake pedal travel would get better if I pumped the pedal once or twice before applying full pressure. I decided to have my brakes bled by the dealer a few weeks ago. They said there was a little air in the system and my pads were good. It seems to be much...
  4. bjt

    Guess who needs a new front sprocket?

    Its only 3 months old... :dontknow: He referred to it in another thread (that is current) of someone having belt or noise issues. My problem just reared up bad within the past few weeks and I wanted to see his pics to see how it compares to my front sprocket.
  5. bjt

    Handlebar & Seat Newbie Question

    A Spyder friend of ours is very petite and she liked the Kewlmetal riser (replacement console and MC handlebars) the best.
  6. bjt

    Guess who needs a new front sprocket?

    Glad you posted this thread Spyderwolf. I am having the same problem and my front sprocket is worn just like yours was. The belt is visibly worn also. Hopefully I can get it taken care of before the Maggie Valley trip.
  7. bjt

    Rear fender!!!

    I like the look. Post more pics when you get them. :thumbup:
  8. bjt

    pull back bars with stock console?

    Not sure if this is exactly what you are looking for but HeliBars makes a pull back riser that shifts the entire stock handlebar setup back a few inches.
  9. bjt

    Poor Service Poor CanAm response

    +1 Once you get him on your case, good things happen.
  10. bjt

    SOLUTION FOR HOT SEATS WHILE RIDING?

    +1 If I had the cash, I'd be ordering one to replace my seat. nojoke
  11. bjt

    New from Tulsa

    With the SE5, you can shift without throttling back. :thumbup:
  12. bjt

    Help II

    Just slightly off topic but I was almost totally inside our Bushtec Roadstar trailer while trying to get the hinges readjusted. Now I know what a sardine feels like.... :helpsmilie: :D
  13. bjt

    Help with Triple Play-- Problems?

    Electrical tape would work but doesn't seal the joint like heat shrink tubing would. If you can't get the tubing on, by all means, use electrical tape instead. The main thing is to eliminate any possibilty of the connections shorting out.
  14. bjt

    Help with Triple Play-- Problems?

    I forget what he called it but that black part with the one connector on it is part of the working unit and you need to plug it into the red module (in the corresponding plug that is right next to it in your picture). I think that black piece is the part that makes the LEDs work without causing...
  15. bjt

    New from Tulsa

    +1
  16. bjt

    You can't change the weather.....or can you?

    She meant next month I think. If not, I guess I'm going it alone to the BBQ.
  17. bjt

    Newbie question about K&N Air filter

    +1 I think the installation instructions for the Hindle state that you do the idle and cooldown step to condition the muffler.
Back
Top