• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. T

    Need help with cat-delete install on F3-S

    I had the same problem when I installed the cat-delete. With cold engine, I backed off the bolt that connects the header pipes to the exhaust pipe. I actually marked the clamp & pipe so I had a reference as to where it should be. I moved the pipe a little so the connection to the cat delete...
  2. T

    Are there only 3 bolts on the Front Sprocket cover?

    5mm hex head allen bolts on my 2017 F3-S.
  3. T

    LED indicators

    Thank you Rattlebars, I'll give it a go if I run into any problems.
  4. T

    LED indicators

    So that's the reason I couldn't find it. I'll install the new LED rear blinkers, change out the front incandescent bulbs for LED bulbs [built in resistors] & see what happens. Thanks hypurone.
  5. T

    LED indicators

    Can anyone advise me where to locate the indicator/blinker relay on a 2017 F3-S. Want to go LED & remove the ugly rear OEM units. Thanks Treva.
  6. T

    Radar detector

    In most Australian states, the road traffic authority is addicted to the income from speeding motorists. If every driver/rider stuck to the speed limits ie no speeding fines, taxes would spiral up in a heartbeat.
  7. T

    F3 Hand Guards

    Hello F650624, do the hand guards interfere with the mirrors? ....Treva.
  8. T

    2017 F3-S: Passenger seat safety sensor (2017 model only) traction control MOD?

    There a 3 plastic clips that hold the cover over the spring loaded mechanism. I shaped 3 pieces of ply [ about 8 mm thick ] to fit under the cover without any free play between the plastic clips. Wrapped some black tape around the cover to hold in place. Hardly notice anything has been done. I...
  9. T

    Everyone welcome Peter Aawen to the Staff

    Good for you Peter, & we all know what an excellent job you will do.
  10. T

    Finally found time to install my fuel door!

    G'day UP, yes it probably does matter. I installed the hinge for the door to open from left to right so it wouldn't interfere with the bowser fuel handle. It works a treat, & should be fitted as standard. Treva.
  11. T

    Finally found time to install my fuel door!

    Hello Frank, I'm located at Montville [ Near Maleny ] Sunshine Coast hinterland. If your up for it, by all means do come & have a look. Better still, ride up, or take seat off & drive, & I'll fit the door. No charge. Just Good to meet like minded spyder riders. Treva. :thumbup:
  12. T

    Finally found time to install my fuel door!

    Looks like BLUEKNIGHT911 has sent you his really good info. There is no inner ring. When the door is shut & the key turned to lock the door, the flange uses the thick plastic seat material to lock behind. See post #1 for the door. Manufacturer part # CBK-101BK. I've attached a few photos. Once...
  13. T

    How many of us have those Magic Magnetic mirror mounts?

    Absolutely up there with the best accessory [ maybe no.1 ] you can fit to a RT.
  14. T

    belt tension

    I check mine on the ground also. After many years of competitive racing off road & road racing + 53 years riding on the road, chain tension & alignment has to be right & may have the same outcome [ probably worse as the speeds are so much greater ] as over tensioned / misaligned belts.
  15. T

    belt tension

    Ah, i now see why PMK uses 140lb. I was looking at the F3 tension. my bad. Thanks mate.
  16. T

    belt tension

    140lb equates to approx 620n. Which bulletin did you use?
  17. T

    belt tension

    Yes PMK, they may tension the belt with wheel off ground, but TST 61Y014S05 recommends belt tension of 300n +/- 100n. At 400n with wheel off the ground, I haven't tried measuring this with a krikit when wheel is on the ground, but i think the tension will be too low. I may have to use the TST...
  18. T

    belt tension

    I can assure you I won't be leaving the dealership until I'm completely satisfied. Thanks for the replies.
  19. T

    belt tension

    Thanks for the feed back. You are right, better info will not only satisfy riders, but also the techs. My new year resolution is to make sure my dealer/techs have received the latest TST'S.
  20. T

    belt tension

    Thanks for the tip PMK, I'll be armed with as much paper work as i can find regarding belt tension bulletins. Merry Christmas.
Back
Top