• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Rotaxer

    Installing 12v ACC Outlet

    That may work I will see if I can get it there easier than from the battery. Thanks Scotty
  2. Rotaxer

    Jacking up for the Baja Ron Sway Bar

    Ramps would probably work too.
  3. Rotaxer

    Installing 12v ACC Outlet

    Thanks, I am quite comfortable removing the tupperware and doing it that way, but was hoping there was a harness for an accessory tucked away up under the dash that was not in use.
  4. Rotaxer

    Installing 12v ACC Outlet

    Is there any unused connectors on a 2010 RT (12v with key off) close to either speaker grill that I could tap into for my soon to be install 12v outlet? Don't really want to run all the way back to the battery.
  5. Rotaxer

    Vacuum lines

    Check this thread, looks to be left side. http://www.spyderlovers.com/forums/showthread.php?50428-Rough-Idle-Check-Engine-then-Limp-Mode-after-Storage
  6. Rotaxer

    Lubing the A Arm Bushings

    To me this area is a great big fail for BRP.:mad: All the fittings should be 45* and pointed so that it is easy to get the grease gun on from the factory where it would be easy before assembly. Then trying to do yourself is very hard because of that shoulder around 4 of the nipples, you can't...
  7. Rotaxer

    turn signal on mirrors

    Went for the stick ons, tried to get the clips off but being a 2010 they are getting brittle. So I got the bottom on both sides which allowed to open up a bit, drilled the hole and fished the wire out through original hole and spiced. All is good!
  8. Rotaxer

    Where did it go??

    And a set of tweezers...sorry I meant another set of tweezers! :roflblack:
  9. Rotaxer

    Where did it go??

    Awww come on give it a try, I did once when I dropped a nut down the "Dark Hole". It wasn't too bad!!!!! http://www.spyderlovers.com/forums/showthread.php?47872-Looking-for-that-nut-you-dropped!!!!
  10. Rotaxer

    turn signal on mirrors

    Wonder if these would work on the Spyder mirrors. They are sweet!!!! http://store.ijdmtoy.com/Universal-14-LED-Turn-Signal-Arrow-Lights-p/led-sku331.htm
  11. Rotaxer

    Mini Ratchet Driver and Torx Bit Set

    I bring this one with me! :roflblack:
  12. Rotaxer

    2013 RT Owners Needed

    GOOD ANSWER Ron!!!!
  13. Rotaxer

    Help! Honey Moon Over?

    Just an added note that I found on another thread. Initially I suspected the sending unit and replaced it. The "Low Oil" and Limp Mode remained, this scared the crap out of me. So off to buy an oil pressure tester (that part was easy) then to find an adapter M10 x 1.0 male to 1/8 NPT...
  14. Rotaxer

    Oil change, Engine light, Fault codes...

    After verifying that I have lots of oil pressure I have done this procedure and the "Low Oil" and Limp mode are gone! Thanks all!
  15. Rotaxer

    Help! Honey Moon Over?

    Life is good again, I have oil pressure and lots of it!!! So I replaced the sending unit and cleared the "Low Oil" and Limp mode. And as a bonus it is the long weekend and maybe warm enough to ride here in the great white north.:yes:
  16. Rotaxer

    Oil change, Engine light, Fault codes...

    Yes Spyder is out of BRP warrantee but I have 4 years with another company. I thought the old sending unit was bad so when I changed it with new one and still had the same symptoms, I thought there was a chance that there is no oil pressure so I definitely haven't and won't rev to 3,000 rpm...
  17. Rotaxer

    Oil change, Engine light, Fault codes...

    Low oil message with Limp mode Last season no problems at all, this year when starting (7-10* Celsius) I would get Low Oil message with the limp mode. Being it is a 2010 I found a bulletin saying the 2010 oil pressure sending units suck, so I ordered a new one and installed it and am still...
  18. Rotaxer

    Rear tire change and possible bearing replacement

    Do you have a Krikit tool to check the belt tension before you start so you can return it to that tension afterwards?
  19. Rotaxer

    Someone's messin' with us . . .

    Well I guess we will see.......................................................in a couple of months!:roflblack:
  20. Rotaxer

    Gorilla 8017 Alarm?

    I had a problem with the paging at first too. When I first installed the alarm and connected the power it said you had about 10 seconds to program the two remotes. I did not have the antennae connected yet, so once the antenna was connected I disconnected the power a reconnected it and...
Back
Top