• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. E

    running rough, missing, popping, bad mpg

    Why are they / You using a Honda gasket on a Can-Am??
  2. E

    Front End Alignment

    As far as the toe goes. I have always had good luck setting my bars strait and measuring from center to center on the tires.Do this both front and back side.Get them at the same measurement and it drives straitdown the road. Thats only to set toe.Not camber or caster. But' if I am Right here.The...
  3. E

    REAR FENDER REMOVED??

    Thank you very much for the photos. That helps more than anything.
  4. E

    REAR FENDER REMOVED??

    How many have removed the rear fender and left it off?? If so how did you mount your plate and hows it do with mud / water flying up your back??PHOTOS WOULD HELP Thanks ED
  5. E

    People asking to take spyder for a ride

    Me to!! :thumbup: may get another Spyder in the hood. More Spyders more parts. Better value. I even went on an H.A. run. They lined up around it also.
  6. E

    2 things confirmed on todays ryde

    NOW THATS A THOUGHT!!!! The little bicycle squeaker they come equipped with is just not enough!!!
  7. E

    FUEL / IDLE ?

    I think its about the same here. But' what they say and what it is who knows?? I'm also curious as to just how much of a diff. Octane would make. Thinking about trying a little octane booster.
  8. E

    FUEL / IDLE ?

    Now that I have set the fuel up once again. It runs GREAT on start up all the way thru warm up. Then the idle gets not bad but still get a little unstable. Runs fare but' still not as good as when cold. I still think it needs more fuel. Got me baffled :dontknow:
  9. E

    my $66.** RISERS

    No thats the part I don't get. I see a lot of post on here.Where risers have been installed and they had to install mir. extenders. But' I see out of mine just fine. No problem with adjustment. Danged if I know what they are talking about.:dontknow: Matter of fact I may see out of them even...
  10. E

    Tire question - wanna change my Ryde a little

    Wider tire on the back? Whats the widest rear tire so far that anyone knows of that we can install without major mods?? I'm thinking traction. Thanks
  11. E

    FUEL / IDLE ?

    So far I have been doing very well with my J.B. settings. Running GREAT!! But' the past few days around 100deg temp and Humid. to match. When I start it up.It likes to fall on its face for a min. 2.Thn after a good warm up it sounds like its missing. I went out and cranked the fuel up even...
  12. E

    Friend having a weird problem

    LOL It sure does!!! :opps: Plum thru the green light :D
  13. E

    Friend having a weird problem

    LOL I do NOT use mine any more. I pushed it down by accident at a stop light and it would not disengage and it WOULD NOT MOVE :yikes: I had to put my full 320lbs on it and bounce to get it to release. nojoke
  14. E

    my $66.** RISERS

    When you mount the risers you will have roughly around 5 - 6" s of the old bar sticking out. If you was to leave them on. It would look like you had 2 sets of handle bars.I chose to take the extra off of mine. I just cut them were it looked best.
  15. E

    my $66.** RISERS

    No actually they are very thick. You break them you have done somthing. Those dog bones are for mounting handle bars on a lot of dif. bikes...
  16. E

    my $66.** RISERS

    I done the install before I cut my bars. I wanted to make absolutly sure it would work first.I took it down the road to see how it felt and it felt great:2thumbs:. Then I cut the bars with a saws all :yikes:.
  17. E

    my $66.** RISERS

    Well I fibbed a little :opps: I also paid $7.99 for shipping of these polished 4" Finch Dog Bones. I used old handles off of the little hydrolic jacks for my 7/8 pipe. If you take a good look you will notice I still need a couple of rubber plugs to clean up the look some. Also look at how I have...
  18. E

    Union shop

    :2thumbs: :roflblack:
  19. E

    THIS IS FUNNY LOL

    If you have ever used an electric fence or know someone who has one you should read this.The language used is a bit salty, but 'he tells it like it is. If you don't laugh hysterically at this,....CHECK YOUR PULSE...this is funny....and true. This was sent by a retired Texas dentist. We have...
  20. E

    Juice Box and O2 observations

    The 02 mod helped mine a lot. Still not perfect but' much better. :2thumbs:
Back
Top