• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. M

    Kuhmo tire fit

    Is there plenty of room on the rear RT for the 255 50 15 Kuhmo tire?
  2. M

    Questions/Observations: my new used '14 RT Limited

    Valve stem I am thinking of installing a longer stem which should clear the rim and make it possible to check tire with out standing on your head.......The replacement stem is about 1 1/2" longer. Any tire place has them.
  3. M

    Harley to be Built in India

    Enfields Enfield is made in India, it started in WW2 when the factory in England could not keep up with the demand. After the war the factory was eventually sold to India holdings. And your right about the quality, it was not up to the post war Enfields that were sold in England in the fifties.
  4. M

    All the leaves are gone.

    Leaves Their in my yard !...............
  5. M

    No more ECO mode for me!

    Decided to try ECO mode out and see if there was an improvement in fuel use. I had not realized how much power you lose when in that mode. i was passing a truck on a two lane and when I accelerated to pass I did not get a whole lot of response and almost had to abort the attempt. So, no more...
  6. M

    Active members

    I see members, active members and very active members. How are these titles obtained ?
  7. M

    The RT in high winds.

    Xwind Yesterday the winds here in No. west Indiana were 35-40 mph and I was riding RT with the winds blowing from the side, the machines handled very good. With the new sway bar.The only other machine I had that was good in xwinds was the Goldwing./...
  8. M

    1330 oil level......

    Overfill I changed oil at the 8K and put a six qt. oil pan under the machine and filled it up to 1/4" from the top ! measured it and it was six qts. and the first oil change was done by a reputable dealer. This is why I do all my own work. My dip stick reads at the fill mark when hot, when...
  9. M

    Small round clock

    Anyone found a small clock to fit where the analog gauges go ?.............
  10. M

    Dark Side

    I used a car tire on my Gold Wing for 10K pulling a trailer and outside of working a bit harder going into a turn it was fine, had about 20 K left in it when I sold the machine. The term "Dark Side" originated on the Gold Wing forums.
  11. M

    Rear belt adj.

    r What is the procedure for adj. the belt. My belt is crowding the inner flange. Best way to get the recommended clearance for belt and flange. 2014 RT SE6
  12. M

    Surprise oil change

    Changed oil on the 1330 today, bought a six qt. pan and proceeded to dump oil. Low and behold it filled the pan to within a 1/4" from the top. Measured in containers and it came out six qt. The first change was done by a reputable dealer which tells me the dip stick is wrong. I put five qts...
  13. M

    Insurance Cost

    Insurance I haqve Geico and cost is $456 per year. I live in Northwest Indiana..........................
  14. M

    Toe in checking

    What is the basic way to check toe in/out with no access to laser .?? what tools are needed and is it checked off the center of the frame or rear wheel.......
  15. M

    Heated gear info you need to know.

    Heated clothes. I went a different route, I used the power outlet in the rear trunk. Drilled a hole big enough to pass the cable through and the short cable is long enough. Everything is tucked in under the seat..................
  16. M

    Front Brakes

    Squeaky brakes Years ago when disc brakes became standard on many bikes, squealing brakes were a big problem. I solved it for the brands I was servicing by putting a thin piece of pipe gasket between the pads and pistons, this eliminated the vibration squeak . The gasket material is very...
  17. M

    Gauges (Newbie)

    Guages Are you selling those gauges ? if so email me. [email protected]
  18. M

    Oil pan plugs

    The plugs for draining oil, engine and trans, where can plain old 12mm plugs be obtained ?
  19. M

    Speaker connection

    Is it possible to connect a headphone jack directly to the speaker wires ? That is something I would like to have as I cannot hear the radio because of severe hearing loss............
  20. M

    Oil Viscosity

    Can anyone say why so low a viscosity ( 5w) when most of these machines are ridden in plus thirty weather ? I doubt if the oil ever gets down to be as thin as 5w. Since it is obvious that it needs a 40 wt. for hot running, whats wrong with a 15w40 oil ??
Back
Top