• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. HamburgerHelper

    flashing cam an on dash

    A constantly rebooting display module can't be a good thing for longevity. Yours or your Spyder's.
  2. HamburgerHelper

    flashing cam an on dash

    I still believe you have a bad/disconnected ground. Since you replaced the battery it was logical to assume it was there but it could be anywhere.
  3. HamburgerHelper

    flashing cam an on dash

    You have flakey ground. Look for a ring connector left off the negative terminal of the battery
  4. HamburgerHelper

    2012 Spyder RT Warranty Issue

    The standard BRP warranty on the 2012 was two years. Assuming it was purchased in 2012 then the vehicle is out of standard warranty. The ultra extended warranty is between the warranty holder and issuer with the terms of the agreement. As far as BRP is concerned your friend has crossed the...
  5. HamburgerHelper

    Accuracy of Gas Gauge Improving

    Are you absolutely certain your dealer didn't replace your old analog fuel gauge with the new & improved stepper motor version? They look identical.
  6. HamburgerHelper

    Another Park Brake Problem

    If your windshield motor still works it could be the switch or more likely the socket the switch sets in could be loose.
  7. HamburgerHelper

    2010 RT limited - new to me bugs

    The switch you push for frunk release is in a socket buried in the tupperware. If it is not the fuse or relay then the next place to look is to make sure the switch is seated firmly in the socket.
  8. HamburgerHelper

    2010 RT limited - new to me bugs

    There is a microswitch on the latch mechanism that informs the system when the frunk is closed. If the microswitch isn't properly aligned or is broken the solenoid won't fire to open the frunk.
  9. HamburgerHelper

    Topping off brake fluid - how to access reservoir(s)?

    The level sensors can also stick. You have to make certain each white float is free and able to return to the topped off position.
  10. HamburgerHelper

    low brake fluid light

    The RT (and maybe other models) have a very fiddley level sensors. I think prior to 2014 such an error would have sent you into Limp Home Mode Heaven
  11. HamburgerHelper

    Emergency brake dilemma

    The brake cable is operated by an electric servo that is located under the right hand side of the tupperware. There is a fairly large spool the cable is spun on to take up the cable. Sometimes this cable comes off the spool and can jam either in the on or off position.
  12. HamburgerHelper

    ACS Suspension not working after dash replacement - Help!!!!

    The ACS (Air Controlled Suspension) must be reset by the dealer using BUDS. This is done with two wooden blocks of known dimensions.
  13. HamburgerHelper

    36mm Scoket

    36mm socket You also need it for the rear wheel nut so you may want to use a heavier socket.
  14. HamburgerHelper

    Let’s try this again

    Alright, my new silver 2010 RT is telling me to Limp Home. The RPMS are not there and the all I can muster is 30 MPH. I did some research and the error code that comes up is P1614. I think there is some kind of app for my phone that will help me with this but so far a call to a dealer only tells...
  15. HamburgerHelper

    hello, new here

    Hello All - I have just purchased my first Spyder a beautiful 2010 RT.
Back
Top