• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. S

    Unknown connector

    I have a 2012 RSS SE5 that has this connector that I've never noticed before,it's located at left upper control arm and if you look down the hole it has 2 female spade connectors that have dielectric grease on them....it appears to have never been plugged in so im assuming I dont need it but...
  2. S

    Sounds like a Miss-fire

    Thanks Dennis....your right the K&N would be cheaper in the long run.
  3. S

    Sounds like a Miss-fire

    Oil in air box 2 questions: Removing airbox to access injector wiring so as to remove controller I noticed some oil in the airbox,...Is this something to be concerned about? I read somewhere this can happen if you tend to keep your oil level at full (which i do) Also discovered previous owner...
  4. S

    Sounds like a Miss-fire

    Thank you Highwayman.
  5. S

    Sounds like a Miss-fire

    The wires are NGK (would this be the OEM wire)?I got a little bit of mis when I started it up tonight (all tupperware stripped off ),Did not see any arcing but did feel header pipes from each jug and the front jug was not firing....didnt seem to mis long. Im in the process of removing the juice...
  6. S

    Sounds like a Miss-fire

    Thanks BajaRon.Im hoping to look at it this weekend,if its the leads,do you have a set in stock?should i also change plugs?,i think i have approximately 8k on it.
  7. S

    Sounds like a Miss-fire

    Yes,I would like to uninstall the 2 Bro Juice box(I have no use for it,it was installed by previous owner) and check my leads while I'm in there....I heard Bajaron Has got really good leads and Plugs? Thanks.
  8. S

    Sounds like a Miss-fire

    I have a 2012 RSS SE5 with 2BRO exhaust and Juice box pro with under 10k miles.....It had been sitting for about 2 months,When I started it up it sounded like it was only hitting on one cylinder,until it started warming up and the miss went away,....I thought maybe gas was going bad so I ran...
  9. S

    Maintenance time...

    Is wrapping the exhaust pipes something that should be done?ive never really thought about it. Sent from my SAMSUNG-SM-J320AZ using Tapatalk
  10. S

    GPS unit I can see the screen in sunlight.

    mount Thanks for the links,.....What do you use for mount? And any good ideas where to mount it on a 2012 RSS? Id like to get a Bluetooth unit for my helmet but I dont think i would hear anything with this 2 Brothers exhaust system. Would also like to be able to throw it on my Suzuki SV650.
  11. S

    GPS unit I can see the screen in sunlight.

    Do you use any kind of anti-glare film on the screen,or do you not need any because of the hood?
  12. S

    GPS unit I can see the screen in sunlight.

    Im really needing a GPS unit,.But having a hard time figuring out which is the best way to go, I just want to be able to see the darn thing in the sun light,My Samsung Galaxy is useless in the outdoors,....Should I go LCD screen and anti-reflective screen cover? What works good for you guys? Thanks.
  13. S

    Is a weep at Water pump shaft seal normal?

    Thank you. I'm probably going to roll with the seep for now, keeping an eye on it. If and when the repair is needed, I plan on doing the repair myself. I want to thank everyone for their help and input. Sent from my SAMSUNG-SGH-I747 using Tapatalk
  14. S

    Is a weep at Water pump shaft seal normal?

    Special Tools Hey DrewNJ. Would I need these two tools or could I get by using either sockets or pieces of pipes?
  15. S

    Is a weep at Water pump shaft seal normal?

    Thanks. Anything special that I need to remove/install the oil seal and water seal? Other than a little common sense:sour:
  16. S

    Is a weep at Water pump shaft seal normal?

    Do you need special tools to remove the clutch cover and remove/install the seals?
  17. S

    Is a weep at Water pump shaft seal normal?

    I did come across this thread, and it was very informative... http://www.apriliaforum.com/forums/showthread.php?34770-Water-Pump-Seals The thread being several years old, I'm wondering if Rotax has upgraded the seal assy? It sounded like people were sending "kzmille" their Clutch housing so...
  18. S

    Is a weep at Water pump shaft seal normal?

    (2012 RSS Spyder SE5) I have a coolant "seep" that sure looks like it's originating from the water pump weep hole, it wasn't much, but left a little puddle at the bottom pan. I pulled all the covers on RH side this weekend to be able to access that area better, I could just get a mirror in...
  19. S

    Lug Nuts

    13/16 fits perfectly with a sandwich bag Sent from my SAMSUNG-SGH-I747 using Tapatalk
  20. S

    Lug Nuts

    Are the front wheel lug nuts susceptible to marring/chipping if using a regular steel socket?(will not use impact),...I read somewhere you can use a sandwich bag over the lug nut to protect it.Has anyone tried that?Did it work well?
Back
Top