• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. AndysF3S

    Multiple Faults and VSS Message when trying to start - any ideas?

    If it is a battery issue. than you should charge it until full with a smaller battery charger, the battery tender may not be able to recharge a discharged battery. Check your battery and see if its a Yuasa or the chinese version? Seeing the VSS flag when attempting to start usually points to a...
  2. AndysF3S

    Looking to get a new '23 F3 S Special Series - what windshield & longer footboards?

    Check out Gustafssons plastics, they have a selection of tints and lenghts of windshield, I made my own floorboards and the description is in the DIY section if you are a handy type of guy. Good luck with your build.
  3. AndysF3S

    Review: Monster Fuel Stage 2 Flash - inc video

    Had my 22 F3S out yesterday, 55°F, and it pulled very strong at 4000 RPM and up. I never accelerate WOT off the line until I reach at least 3500 RPM and shift at 7200 +/- and it is super responsive. I left my rev limiter at stock, since the torque starts dropping off quickly after 7000 and the...
  4. AndysF3S

    Broken output shaft - Final Drive Belt Tension involvement?? Sept '23 BEFORE RECALL

    My SWAG is that the shaft failed from fatigue, it looks like the crack initiated about 12 oclock and than progressed until it finally failed at about 7 oclock. There is a slight ridge across the top that might have been a slight machining error that created the stress riser. The failure of the...
  5. AndysF3S

    Does the F3 need a new design?

    I won't be buying another one so it doesn't matter to me.
  6. AndysF3S

    Any Pro/Con comments on Ryker OEM Heated Grips? Anyone installed them?

    I had the factory heated grips installed on my 22F3S and as I posted a while back; only "on or off" and marginal at 32 F but better than nothing. The Skidoos have a range of heat choices (at least 5 or more) and go from low to hot, much better in my opinion.
  7. AndysF3S

    Sound Cameras will be installed in Montgomery County, Md.

    With stock muffler and cat delete (no plug style baffle) you will exceed 85 db at more than 1/2 throttle during acceleration. No problem in our province yet, there are tons of Harleys and big trucks that I can hear from my house which is almost 1/2 mile off the highway. Enforcement is more about...
  8. AndysF3S

    Bummed out waiting for a part

    I have ridden Skidoo, Canam and now a 22 F3S since 1996 and have not had any problem getting the odd part from BRP to date. I do the maintenance myself, once off warranty and have found Rotax/Skidoo/Canam to be very reliable. The reason I post this it is easy for someone new to the product to...
  9. AndysF3S

    1330 Performance Upgrades

    You are correct that many Spyder owners may not want to flash their ECU, but those of us who choose to do that can really appreciate the difference in performance when we hit WOT at least a couple of times per ride out on the highway.
  10. AndysF3S

    Dash went black & I couldn't shift - blown fuse! No idea why...

    Glad that replacing the fuse worked for you, but the fact that the fuse burnt means that something caused the circuit to draw excess current indicating that it may happen again. You indicated that multiple starts and stops on your ride were all good but you seemed to indicate that when you...
  11. AndysF3S

    Anyone else notice the excessive amount of throttle twist/rotation required??

    BUDS allows you to read codes and reset certain sensors when replaced, but it will not allow you to reset engine parameters in a meaningful way. You need to get an ECU reflash done if you need to change those for performance etc.?? I don't own BUDS, so I could be wrong, but the service tech told...
  12. AndysF3S

    When To Replace Belt tensioner/Vibration Damper/Idler Pulley?

    The number you show may not be current, it may have been updated and secondly you do not need the whole kit just the repair kit which I saw somewhere on the Can Am site, but can't find right now, it's about 1/2 the price!?
  13. AndysF3S

    VSS Fault at first power-up - anyone else?? Normal??

    I bought my '22 F3S last year and it flashed the VSS code on almost every startup; the problem was that the original battery would momentarily drop the voltage during cranking at startup to below 10 volts, triggering the fault. Solution - replace the battery; and I have not seen the VSS code on...
  14. AndysF3S

    1330 - is there a Torque & HP dyno chart available anywhere?

    There is a dyno chart on the Monsterfuelinjection.com website if you want to check it out.
  15. AndysF3S

    A different look at setting the correct tire pressure

    I am happy that my 22 F3S does not have TPMS, my 22 GM Sierra 1500 At4 does, and the window does not allow for adjusting the pressure lower than the app allows without taking it to the dealer. It is higher than an empty pickup requires with aftermarket tires. I get constant reminders on my...
  16. AndysF3S

    My Problem Free time with the RT is over!

    I stand corrected on the later model 23 & 24 coming with Yuasa batteries instead of the Chinese. When the dealer put through a warranty claim on mine he referred to an Oct 23 internal bulletin that referenced the Yuasa as the replacement.
  17. AndysF3S

    My Problem Free time with the RT is over!

    BRP did use Chinese made 300 CCA batteries in 22 &23 and maybe previously but are back to using the Yuasa YTX 24L (350cca) in late 23 and 24. As far as a bad charging system its always possible but highly unlikely given the large number of Rotax engines out there. As far as too many accessories...
  18. AndysF3S

    My Problem Free time with the RT is over!

    If the battery requires replacement is that a Spyder design fault or is it a regular maintenance item that can and does occur on all makes and models of engine powered vehicles?
  19. AndysF3S

    Contemplating buying a Spyder - any reliability, power, and buyer's remorse issues?

    When you do your test ride keep an eye on the RPM vs speed and gear your in. This engine revs easily and smoothly and it is not a GoldWing or a Harley its made by Rotax.
  20. AndysF3S

    2022 RTL oil change analysis results

    I'm not a believer in fuel or oil additives unless you are going to store the vehicle for the winter season.(Something like Stabil) If after a vehicle has been stored and it exhibits unusual running characteristics I might consider a shot of fuel cleaner but not on a routine basis. Buy a...
Back
Top