• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Freddy

    Is there a non-OEM Fuel Filter alternative for an F3?

    You won't find a metal one except from a dealer. diameter 35mm; body length 55; barb fittings 8 http://www.nfhconnect.com/Lookup/PartDetail?Part=133319&Brand=NAP&hb=688 The Ryco Z200 has about 4 times the capacity of filter material compared top the stock item. Udate: Owner took his F3...
  2. Freddy

    Is there a non-OEM Fuel Filter alternative for an F3?

    Old-ish thread but new to me. Yesterday I had the wonderful experience of spending almost 6 hours replacing the fuel filter on a friend's 2017 SM6 after the trike 'played up' under him a few days earlier. He was cruising at hi-way speed when the engine began to lose power intermittently. He...
  3. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    A pity it isn't in numerical order of the frame number - last 6 digits.
  4. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    No, because BRP doesn't know yet but years would be a good bet.
  5. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    Here it is for Australia, only 479 to be done. :yikes: https://www.vehiclerecalls.gov.au/recalls/rec-006121
  6. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    Is 8721 a small percentage? BRP were dragged in kicking and screaming after 1 unfortunate owner reported the safety issue related to loss of motion due to shaft breakage as stated in the NHTSA Cronology section and linked earlier in this thread.
  7. Freddy

    What's best for Cold weather winter storage? Fuel additive? Battery care? Rodents?

    TCW3 mixed with fuel at 1% concentration. Can be used all year round.
  8. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    First report of this failure on this forum seems to be here. https://www.spyderlovers.com/forums/showthread.php?141974-Gearbox-failure-intermediate-shaft-broken&highlight=broken+shaft
  9. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    5% affected by shaft break or fitted with a suspect shaft? So the other 95% are to be done anyway? Very curious that the link below seems to be the second report of failure on this forum...
  10. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    l wish you luck. It'll be a whole lot worse than the drive sprocket recall, and here we were worried about curing time for Loctite. This recall will take years.
  11. Freddy

    Recall - 2017-2019 RT and F3 Engine Output Shaft Can Break!

    Corrected spelling.
  12. Freddy

    Need to know how to replace fog light bulbs - anyone??

    I replaced a mate's lower left fog light bulb today on his 2018 RT - not tooo difficult following the above tips. Here's a pic of the air intake tube with rubber elbow and clamp that needs to be removed, then deform the elbow, push and hold it down with a long screwdriver or similar. Note the...
  13. Freddy

    RTL Initial & now 2nd oil change analysis results

    Ride more, worry less - as some bloke hereabouts often says. :cheers: No oil analysis = no problem, as 99.9% of other owners know.
  14. Freddy

    A Arm Bushings - can I do it? Any video of it being done??

    I Tried one of those very early on but it didn't work for me - like Mikey. I put 90 and 45 degree grease nipples in (6mm thread).
  15. Freddy

    A Arm Bushings - can I do it? Any video of it being done??

    The problem is that they need to be lubed on a regular basis. But no one does. Except me. :ohyea: Done every 8,000km (5,000m). :cheers: Is there a way to do this without dismantling everything and turning it into a fairly major job? That depends on what you consider major. But a 2017...
  16. Freddy

    P0351 error and Check Engine Light on - any help/advice?

    The dash cluster is held by 2 clips on the top edge. There are 2 holes in the upper cover, seen from above, which give access to the 2 clips which can be depressed with a small screwdriver to release the cluster.
  17. Freddy

    F3T died rapidly after sitting 2 months, now no start - any suggestions?

    Spray starting fluid into the air intake while cranking. If it fires momentarily, it's got spark but not fuel.
  18. Freddy

    Are Dealers 'dumping' New-Old-Stock Spyders instead of selling latest models?

    Too pricey to sell. Savage M/C is the big dealer, who's the other?
  19. Freddy

    Any alternatives for Discontinued Fuel Injectors for 2009 GS SM5?

    I've had success cleaning such injectors with a fuel rail, used fuel pump, tub of kero and a 9v battery. The injectors can be go into the injectors the opposite was after removing the tiny inlet filter/screen, reverse flushed, then fitted the correct way to check spray pattern. Here's a link...
  20. Freddy

    998cc 2012 RS with metal in oil and smells like gas - any ideas?

    Pieces that large would not get past the oil pump suction screen - hopefully.
Back
Top