• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. juscuz

    2015 F3 SM6 Clutch slave cyclinder failure.

    What symptom were you having to determine the slave cylinder was defective? Reason for my question, is because I have the same year and model with the bike creeping, hard to get it into gear, and it would not go into 5th unless the engine was off. I changed the slave cylinder, the gear position...
  2. juscuz

    What's the correct sequence for tightening Valve cover screws for a 2015 F3?

    Replaced the valve cover gasket on my 2015 F3s and no more leaks. Only has 31K miles. Ironically, I had just less than a year ago changed the plugs out at 29K only to find out one plug was barely finger tight causing the removal of many parts just to reach them. Anyone who has experienced this...
  3. juscuz

    What's the correct sequence for tightening Valve cover screws for a 2015 F3?

    What's the correct sequence of valve cover screws after replacing gasket for 1330 engine?
  4. juscuz

    Clutch Problems F3T SM6 - creeping when lever pulled in! No Locktite on nut securing clutch basket!!

    I know this is old as heck but hopefully it will help some folks. It never ceases to amaze me on how I'm sure there are MANY of us with the same problem with the creeping, hard to shift into 5th gear or neutral that ended up having to pay for a repair that should have been a recall from BRP. I...
  5. juscuz

    Clutch feels like it's not engaging - any suggestions?

    Any update on your gear changing issue???
  6. juscuz

    2015 F3-S jerking while riding

    Had a similar experience with my 2015 F3s just a few weeks ago. Was just about to get on the interstate and what the hell, the bike began to jerk, backfire and had to keep the throttle moving so it wouldn't die on the way back home. I had only gone 1.5 miles when this happened. No previous...
  7. juscuz

    Survey : who has had the newest (recall) front sprocket fail?

    A friend had his front sprocket replaced with the newest version (stainless steel in color) a few months ago on his 2018 F3L under extended warranty. Mentioned to me the next day right after being done that the bike seemed different. Well on a ryde a few weeks ago the shaft from the trans had...
  8. juscuz

    New helmet and vendor love

    I also have the LS2 Variant II and had the forehead itch and unsightly lines embedded after riding for a few hours. Problem solved by using a piece of foam cut to size and placing under the lining in the top portion of the helmet relieving the pressure on the forehead. Trial and error with...
  9. juscuz

    FYI -Cheap Cycle Parts has CLOSED

    Just so folks know that weren't aware, Cheap Cycle Parts wasn't a parts supply warehouse type of setup but a middle man establishment. I found this out by calling and checking on a backordered item. You can find same parts at CAN AM OEM PARTS.COM. This site is set up exactly for the most part...
  10. juscuz

    Any ideas on Full Rear Fenders for F3s?

    Actually "Black Carbon" refers to the color not the material. It's metal, have one on my 2015 F3s.
  11. juscuz

    HELP: Rear running lights and tip lights no worky.

    Rear lights referred to in the original post is the factory center section which is normally always on when riding. The operations of the stop/turn signal and reverse lights all work properly but the sealed center portion with the two small screws that looks like a bunch of eyes encased...
  12. juscuz

    HELP: Rear running lights and tip lights no worky.

    Need help in figuring out why the rear running light and tip lights are not working on can am spyder rt (2018). Pulled all fuses, including the square ones in the fuse boxes, all good. Even replaced with new fuses in case problem with fuse not visible. Now I'm thinking it may be a relay...
  13. juscuz

    What are these Fender Lights called, and how do I replace the strip?

    Available at Slingmods.com
  14. juscuz

    Anyone have an Ultimate seat on their F3T? Pro's & Con's??

    BRP backrest won't fit the ultimate seat (different mounting system), BUT you can order a larger (wider) backrest for the driver.
  15. juscuz

    Anyone have an Ultimate seat on their F3T? Pro's & Con's??

    I've had the Russell Day Long on my F3s for a while but just couldn't get comfy over time and passed it on. Bought the Ultimate tall boy with the wider driver's backrest and after break-in which took about 500 or so miles, it's a winner. No more pins and needles or numbness. Can ride now for...
  16. juscuz

    Spare front sprocket

    Same here. White sprocket on backorder through Cheap Cycle Parts until 24 July estimated shipment date. Got tracking info for Wed 30 Jun. Also being used as spare.
  17. juscuz

    Passenger rails can't find the parts

    Cheapcycleparts.com
  18. juscuz

    Oh crap broke pin

    Cheap cycle parts
  19. juscuz

    chrome rear wheel

    Before the comments begin with "you do realize this is a VERY OLD POST"? Well yes I do BUT I'm asking anyway. If anybody know of a source that carries the rear chrome wheel for a RT 2014 up (NUMBER 219400574) for less than the BRP price range in the mid 6 hundred or E-bay also in this area...
  20. juscuz

    And so it begins...

    I knew there was something I myself was supposed to do years ago!!! Too late for me. LOL
Back
Top