-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
2015 RS panel removal
- Thread starter Graptor
- Start date
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
ON-LINE MANUAL
If you don't want to get one .....PROCALIBER.COM has parts fiches' you can look at that shows how your Spyder is put together....every nut ,bolt , etc......Mike :thumbup:
If you don't want to get one .....PROCALIBER.COM has parts fiches' you can look at that shows how your Spyder is put together....every nut ,bolt , etc......Mike :thumbup:
Chupaca
New member
Let's see....
Once you have the lower side panels off you will find two (2) 10mm bolts up against the center frame. cheapcycleparts.com also has parts breakdown so you can see the mounting points. there is also a torx up to the front you can't miss. Not that hard and many leave those panels off for better air circulation I drilled large 11/2" holes in them. :thumbup:
Once you have the lower side panels off you will find two (2) 10mm bolts up against the center frame. cheapcycleparts.com also has parts breakdown so you can see the mounting points. there is also a torx up to the front you can't miss. Not that hard and many leave those panels off for better air circulation I drilled large 11/2" holes in them. :thumbup:
bmccaffrey
New member
Lamont did a video on changing oil on RS
Tells how to remove panel. Should watch
Tells how to remove panel. Should watch
Similar threads
