622 trailer badging question

[TicketBait]

getting the RT 622 trailer today, I have the premiere edition tag to go on the back left. Does
anyone have a photo showing the proper placement, read a post where it said it is to go to the left of the spyder badge?

see post #10 for answer below:clap:

 

[MarkLawson]

I'm interested in that too. I have the same thing, although, for the life of me I can't remember where I put that sticker...

Anyway, I thought it went on the left-front corner next to the existing sticker. Problem is to get it in there, I'd have to remove the existing sticker & move it over. I don't believe I can do that without damaging it.

Some help would be great!

 

[canam9]

I dont have the sticker.

 

[NancysToy]

I dont have the sticker.

The sticker only came with the PE RTs, as far as I know.

 

[scudrunner]

I got a sticker and asked the dealer what it was for, since it didn't seem to fit anywhere on the RT. The dealer didn't know. I went back and told them after I found out here.

 

[canam9]

The sticker only came with the PE RTs, as far as I know.

But a have a PE RT.:dontknow:

 

[NancysToy]

But I have a PE RT.:dontknow:

Should have been in the bag with the iPod and the extra lock cylinder, then.

 

[tea6638]

PE Trailer Badge goes one the left side of the trailer next the Spyder Badge. In most cases, the Spyder Badge has to be removed and repositioned to make room for the PE Badge. The correct position for the Spyder Badge is forward of the PE Trailer Badge. If anyone needs help, Call Extreme Machines at 732-786-9696 and ask for Ron in Service. He will talk with you or your Dealer to make sure all Badging is put in place correctly.

 

[canam9]

Should have been in the bag with the iPod and the extra lock cylinder, then.

I have the bag,iPod and the extra lock cylinder is in the trailer. I must have lost the sticker.:gaah:

 

[TicketBait]

Picked up my trailer and put 260 miles on her. As a word of caution you need to remember to
re activate the trailer setting each time you start the bike.

I still have not backed her up yet, gonna go practice today in a big empty parking lot !

I'm interested in that too. I have the same thing, although, for the life of me I can't remember where I put that sticker...

Anyway, I thought it went on the left-front corner next to the existing sticker. Problem is to get it in there, I'd have to remove the existing sticker & move it over. I don't believe I can do that without damaging it.

Some help would be great!

I got a sticker and asked the dealer what it was for, since it didn't seem to fit anywhere on the RT. The dealer didn't know. I went back and told them after I found out here.

PE Trailer Badge goes one the left side of the trailer next the Spyder Badge. In most cases, the Spyder Badge has to be removed and repositioned to make room for the PE Badge. The correct position for the Spyder Badge is forward of the PE Trailer Badge. If anyone needs help, Call Extreme Machines at 732-786-9696 and ask for Ron in Service. He will talk with you or your Dealer to make sure all Badging is put in place correctly.

Ahh, the confusion, it is now clear. The wording "spyder badge", No what is meant to be said is silver
colored "CAN-AM" badge ,needs to be moved more forward. As shown in photo below. Looking at the trailer
from the rear, it is forward of the left side wheel

man did I get her dirty.:yikes:

 

[TicketBait]

for PE trailers

went to dealership and they repositioned the emblems,:2thumbs:

I took a photo with no flash then lightened up picture. to showthe exact location

 

[canam9]

This is so cool! I'm bummed I lost my PE badge.