pickelhead
Member
I've measured the 33 feet, have marked the upper and lower heights, getting ready to drain the air through schrader valve. After adjusting the heaadlights, how much air should I put back in? :dontknow:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Headlight adjustment on RTS
- Thread starter pickelhead
- Start date
johnwinslow
New member
Just start it up and it will fill automatically, do not be sitting on the passenger seat as it has a sensor to adjust for your passenger.
Bob Denman
New member
Ok here's the RT chart. Thanks ICE for the RT headlight height.
Assumptions:
Spyder RT Headlight Height: 35.0" (This could change with a heavier/lighter driver/passenger, cargo load, tire pressure, performance
shocks, etc.)
BRP Spec for Headlight Adjustment: Adjust for a low beam height of 25.3" to 28.8" (27.1" halfway point) at 33' with a 200 lb driver.
Calculated Angle: 1.15° downward
Angle Distance Low Beam Height Adjustment
1.15° 33' 25.3" - 28.8"
1.15° 30' 26.0" - 29.5"
1.15° 25' 27.2" - 30.7"
1.15° 20' 28.4" - 31.9"
1.15° 15' 29.6" - 33.1"
1.15° 10' 30.8" - 34.3"
If for any reason the height of your RT headlights are higher or lower than 35" just let me know and I'll calculate a custom chart for
your specific RT. Thanks, Jim
Assumptions:
Spyder RT Headlight Height: 35.0" (This could change with a heavier/lighter driver/passenger, cargo load, tire pressure, performance
shocks, etc.)
BRP Spec for Headlight Adjustment: Adjust for a low beam height of 25.3" to 28.8" (27.1" halfway point) at 33' with a 200 lb driver.
Calculated Angle: 1.15° downward
Angle Distance Low Beam Height Adjustment
1.15° 33' 25.3" - 28.8"
1.15° 30' 26.0" - 29.5"
1.15° 25' 27.2" - 30.7"
1.15° 20' 28.4" - 31.9"
1.15° 15' 29.6" - 33.1"
1.15° 10' 30.8" - 34.3"
If for any reason the height of your RT headlights are higher or lower than 35" just let me know and I'll calculate a custom chart for
your specific RT. Thanks, Jim
Similar threads
