-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
License plate light cover missing
- Thread starter Fire911
- Start date
yep it is 48 bucks the lens in heat glued in place and is not replaceable. Other than remove the fender and relocate the plate and lite there is not much you can do. Been there done it 3 times now
Note I did not replace the wires I just but connectors in place since me and my pine tree love each other will save some time next time
Note I did not replace the wires I just but connectors in place since me and my pine tree love each other will save some time next time
Last edited:
COOLMACHINE
New member
Others will pitch in.
Quite a few people have had this happen including me. I bought the part and replaced the reflector part myself but there are others who have bought aftermarket replacement parts including BLUEKNIGHT911. in this forum. He might be able to help you with info of what he bought.
Quite a few people have had this happen including me. I bought the part and replaced the reflector part myself but there are others who have bought aftermarket replacement parts including BLUEKNIGHT911. in this forum. He might be able to help you with info of what he bought.
I bought my spyder on 1/22/11 (2010 RS) and lost the light cover about a month ago. Took it to dealer two weeks ago, and they are replacing the whole assembly under warranty for no charge. I would not pay the $50.00, as you can buy the whole assembly for $45.99 (listed on BRP site), and since they get it wholesale then you will be paying for part of the labor too. As others have stated this is not something new, and when mine fell off I figured I was going to have to replace it myself. Then when I found out it is common, so that was when I contacted my dealer. If your dealer insists that you have to pay the $50.00, tell them to either contact BRP (like my dealer did), or do it yourself and find another dealer.
SpyderWolf
New member
I would also try to get it replaced under warranty. If it continues to be a problem, it can be resolved permanently by replacing with a CAT tail light instead. That is what I and a few others have done.
Spyder Cat
New member
RS tail light cover MIA
Last week the 2010 RS tail light cover (just the red lens) flew off while Vaughn was riding down the highway.
He bought a LED tail light assembly and plans to replace the whole thing.
Hopefully it won't throw a code. nojoke
Last week the 2010 RS tail light cover (just the red lens) flew off while Vaughn was riding down the highway.
He bought a LED tail light assembly and plans to replace the whole thing.
Hopefully it won't throw a code. nojoke
FANG
New member
:thumbup: Lost mine twice - checked with dealer after the 1st one was lasr and I was told it was not a warranty issue -- didin't press the issue -- should have. Another spyder owner (not part of the forum) gave me his assembly because he had removed his rear fender and didin't need it anymore. Lost that one in Sept this year -- said to H*** with it and replaced it with an Mini Cats Eye from DennisKirk.com. Now I have a tail light/brake light and tag light combo!!!
7 Decades
New member
new item
Look at ESI CYCLE new item tail light. ESI is a supporting vendor :thumbup::thumbup:
Look at ESI CYCLE new item tail light. ESI is a supporting vendor :thumbup::thumbup:
Pincushion
New member
I used the same light Joet82 used....
Grandpa Spyder
New member
Make your own
When they want to charge you $50.00 for a light it is time to get creative.
When they want to charge you $50.00 for a light it is time to get creative.
Bumblebee67
New member
If this is what you are talking about - I just ordered me one last night.. :thumbup:http://www.customdynamics.com/can_am_spyder_reflector.htm ...I was hoping to shed more light on my rear-end :roflblack: :roflblack: seriously..I did order one
MikeinGA
New member
I have one and it's great. Extra light in the back is a good thing, and for about $20.00. That's IMHO.
Mike
NancysToy
Motorbike Professor
There are two ways this happens. First, the screw can just come out. The assembly has a thin metal bracket that the screw goes into. This cannot bottom out against the lens, so it bends when the screw tightens, and the screw is never real tight. The best cure is to dab a little RTV silicone on the screw hole just before you replace the lens and screw. The second way is when the lens breaks away in the thin area around the screw. The broken lens falls off, leaving just the screw. Your screw may then fall out because there is nothing to hold it, but if you find the screw and no lens, it is certain your lens broke. The best cures are to either reinforce your lens by gluing in some styrene or acrylic plastic at the screw boss, or to purchase the reinforced ESI (Custom Dynamics) lens. You could also put a few dabs of silicone at the lens-housing parting line to hold the lens on no matter what. These can be easily slit if you need to replace the bulb later. Every RS owner should consider these measures. It is far too easy to lose your license light lens, and it is expensive to replace.Thanks for the info. I'm going to get it covered under warranty as long as I can then if it happens again look into different options. Really been considering removing the rear fender, this may have been a sign that I'm supposed to.
Similar threads
