SM10 Won't Pair

[muleman1]

Got an Sm10 and a pair of SMH10's this week...but can't get the Sm10 to pair with the first headset. Any ideas from the brain trust out there?:sour:

 

[ARtraveler]

Just got my Sena's yesterday. Went through the pairing process for the pair A & B. Everything worked per lights, sounds, and beeps--but I did not try them out yet. For pairing a third unit, directions say then to go through the same process with A & C. The directions leave a little bit to be desired, and I have not installed them in the helmets yet. I am replacing Cardo 2's.

 

[lyonsden]

If you paired the headset with your phone first it might have taken the A2DP protocol and that is what the SM10 uses. I would remove all pairing as per the manual, pair the 2 headsets and then pair the sm10.

 

[Motorcycledave]

SENA

Hi Guys
you should not have any trouble paring the units if you need tech. help to do it
go to www.senabluetooth.com and click on support help, they can and will help you
with them.
Dave

 

[SPYD1]

I agree. I actually got them on the phone, very helpful. They walked me right through it. No problems since.

 

[shelbydave]

how did you pair with the SM-10? I paired my SMH10's together, then used the phone pairing button to pair with the sm 10 on each headset. Works like a champ!