Spyder RT from Viet Nam need your help

[phamduyduc]

Hi all, im from Vietnam, this is the first time i buy a can-am, in Vietnam dont have Can-am dealer then very hard to use and debug, now my can-am on Limp home mode, i cannot run over 50mph and on screen show below errors: C0051 C006C C0049, pls help a solution to fix and clean problems. after finding and searching i found
C0051 about Wheels sensor.
C0049 Brake sensor
C006C: Comunication fault
but i dont have understand to resolve those issues :-s
should i buy diagnostic kit to use with can-am spyder RT?
http://www.diag-systems.com/shop/19/desc/diagnostic_kit_can_am

 

[DragonLorD]

quick fix

Hi all, im from Vietnam, this is the first time i buy a can-am, in Vietnam dont have Can-am dealer then very hard to use and debug, now my can-am on Limp home mode, i cannot run over 50mph and on screen show below errors: C0051 C006C C0049, pls help a solution to fix and clean problems. after finding and searching i found
C0051 about Wheels sensor.
C0049 Brake sensor
C006C: Comunication fault
but i dont have understand to resolve those issues :-s
should i buy diagnostic kit to use with can-am spyder RT?
http://www.diag-systems.com/shop/19/desc/diagnostic_kit_can_am

View attachment 57654View attachment 57655View attachment 57656View attachment 57657View attachment 57658

Hi There,
most of the codes most of the times are glitches.
- disconnect battery for 30 minutes, reconnect tight and if codes and limp are gone, it was a glitch.
- if not, it is a diagnose and needs treatment, given your circumstances i advice to get full shop repair manual for start ( ebay )
- believe that knowledgable guys chime in soon and try to help you soon
take care
:2thumbs:

 

[MrLooney]

VIETNAM SPYDER

Hi phamduyduc

In searching for a Dealer, I found one near HCMC about 2 ~ 3 hours North East??
Can you tell me how you got it there? what the cost and any other information you can give me??
I am seriously considering moving there in the next few months.
I have seen the dealer in Hong Kong and talked to him. He said he has many in the warehouse. What year(s) I did not ask.

Please send me an email ~ ~ ~ [email protected]

Thank you

Dan

 

[NancysToy]

Take a look at your rear (or front) ABS sensors. Improper air gap, a damaged sensor wheel, wire damage (easy to do if the caliper is removed or a trailer hitch is installed or removed), or a bad connection could be the cause.

 

[ARtraveler]

:welcome: Just wanted to say hello. There are a lot of knowledgeable people on board and you should be able to get some good information about your problems.

 

[phamduyduc]

Thank for great support!
Actually, I have tried to remove the battery to reset the machine but it does not work anymore, my friend have to buy a diagnostic kit (link above), he used it to delete the code errors, but I think it does not really fix the issue, it is only a tool to read and clear error? i think i can fix C0049 and C0051 but C006C still there , do you have any suggest for this issue?

@Dan: i sent to you a msg by yahoo messenger. im sure with you dont have any can-am dealer in HCMC, only ducati dealer.

 

[MrLooney]

VIETNAM SPYDER

Hi phamduyduc

I am sorry can not find your message. I have some computer problems with Yahoo. But can still open my email site from I.E.. please respond there. [email protected]

Thank you

Dan