Sway Bar Suspension Upgrade for 2013 RT Models

[BajaRon]

I am in the process of developing a better sway bar for the 2013 RT model Spyder. I have 1 test pilot at the present time but I am in need of a second one. I have the Prototype ready to ship to you. Lamont and I installed a sway bar on his 2013 ST so I can provide you with decent install instructions. It is a bit more difficult than the process for earlier model RT's but not all that bad. Mostly it requires removing more pieces.

I would guess it to be a 2 hour job.

If you are interested please email me at [email protected]

Thanks!

 

[SpyderAnn01]

Email sent

 

[spydercowboy]

I'm beginning to think 2012's are going to remain very popular for a while. At least until the 2014's come out with a lot of fixes. But then my Harley is at the end of frame build that some say it's worth it to get the newer frame. I don't agree there either. I prefer waiting and letting others work out the bugs.

 

[SpyderAnn01]

I'm beginning to think 2012's are going to remain very popular for a while. At least until the 2014's come out with a lot of fixes. But then my Harley is at the end of frame build that some say it's worth it to get the newer frame. I don't agree there either. I prefer waiting and letting others work out the bugs.

Sometimes I would tend to agree with you but the bar isn't so much a "fix" as it is an improvement and Ron only came out with the sway bar for the RT (2012 and prior) this past December. The handling improved 100% with the new bar and I'm sure it will do a lot for the handling on the 2013s also. The handling on the 2013s is better than the older model stock RTs so I figure with the addition of a beefier bar it will surpass my old 2010.

 

[Chupaca]

Good to know..!!

I'm sure by now there is great interest in your sway bar for the 2013's. The response to the earlier ones have been great....!! opcorn:opcorn: