• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Bad Vibration 2024 Can Am Spyder RT Limited - what can I do to improve my ride?

Bake1987!

New member
I’ve been riding motorcycles for years and a few years back I did a demo ride at a dealer. It was a 2025 Sea to Sky. Absolutely loved it!
Never having ridden a Spyder otherwise, I decided to by a carryover 2024 RT Limited. I did not realize there was such a difference. I have vibration in the bike itself, the handle bars, & the floorboards. I am a heavier person. I have taken it back to the dealer & they test drove it and it had no vibration. Any ideas what I can do to improve my ride? Would manually changing the rear suspension help?
 
Before I would change the suspension, I would take it to another dealer (or an experienced independent Spyder mechanic) and have it checked the same way. Also, ask them to check the tire wear and alignment. It’s an expensive endeavor to change the suspension out and get much higher quality suspension, so I would want to make sure all other possibilities are eliminated and that the dealer did appropriate due diligence in checking things. Just my two cents.
 
Although my Spyder is 10 years older than yours, I had a similar problem. The Dealer had to change both front wheels! 🤪 It was done without any complaint from them after a test ryde.

If it's a really bad vibration, your dealer is on drugs...
 
Although my Spyder is 10 years older than yours, I had a similar problem. The Dealer had to change both front wheels! 🤪 It was done without any complaint from them after a test ryde.

If it's a really bad vibration, your dealer is on drugs...

If that’s the problem, with your bike, it should be under warranty. Also potentially check the situation with the swaybar..
 
I’ve been riding motorcycles for years and a few years back I did a demo ride at a dealer. It was a 2025 Sea to Sky. Absolutely loved it!
Never having ridden a Spyder otherwise, I decided to by a carryover 2024 RT Limited. I did not realize there was such a difference. I have vibration in the bike itself, the handle bars, & the floorboards. I am a heavier person. I have taken it back to the dealer & they test drove it and it had no vibration. Any ideas what I can do to improve my ride? Would manually changing the rear suspension help?

Did they check the balancing of the front tires? Are the tires inflated to spec? 2024 would still have been wearing the older Kenda tires I believe. I would guess there is a glob of balance weights on them. Also, the trike could have been sitting for almost 3 years, creating flat spots on the tires. If it was mine, it would have new car tires on it ASAP.
 
Last edited:
This sounds out of the norm. I would have the selling Dealer call BRP and get some real help. If BRP has a good day they should be able to Help.

I hope this helps you.
 
Did they check the balancing of the front tires? Are the tires inflated to spec? 2024 would still have been wearing the older Kenda tires I believe. I would guess there is a glob of balance weights on them. Also, the trike could have been sitting for almost 3 years, creating flat spots on the tires. If it was mine, it would have new car tires on it ASAP.

The dealer said they checked the air pressure in all 3 tires and they were good. Never said anything about the balance on them. From what I had read they seem to be the older Kenda tires. What would you suggest I put on for car tires?

This sounds out of the norm. I would have the selling Dealer call BRP and get some real help. If BRP has a good day they should be able to Help.

I hope this helps you.
I will try that Thank you.
 
If you have anything that resembles a service shop at your dealership, the first thing they've got to do is own up to there being a problem, which they should have realized when they test drove it after they pulled it out of the box and set it up!!!!! The first thing I would guess from what you're saying is that the tires need to be balanced, and if they can't balance them, then they should replace them with tires that they can balance! Getting them to put car tires on is another battle in itself and the chance of that is probably next to none, but if you can, great for you!! Most dealerships have to follow the motherships rules of engagement and run the crapola tires! Good luck and remember you are still under warranty!! Good Luck!
 
The dealer said they checked the air pressure in all 3 tires and they were good. Never said anything about the balance on them. From what I had read they seem to be the older Kenda tires. What would you suggest I put on for car tires?


I will try that Thank you.

I like Vredesteins Quatrac on the front and a General Altimax on the rear. Some report clearance issues with Vredesteins Quatrac 165/60R-15 on the 2020+ Spyder RT's, as they are taller than the 165/55R-15 Kenda's. I run the 1/2" wider PPA wheels with 175/55R-15 Vredestein Quatrac's.
 
The dealer said they checked the air pressure in all 3 tires and they were good. Never said anything about the balance on them. From what I had read they seem to be the older Kenda tires. What would you suggest I put on for car tires?


I will try that Thank you.
Do not put on car tires. The ride will be significantly impacted negatively in my experience.
 
Do not put on car tires. The ride will be significantly impacted negatively in my experience.
Tell us more about your experience. Brand of tires, inflation etc. You are one of very few that that such an experience, it would be nice to know more details. If you had followed the inflation specs of the OEM tires the car tires would have not performed well. I run 16-16.5 in the front and 18-19 in the rear and they performed great.
 
I had a bad vibration in my 2024 S2S starting around 9.5k miles which steadily got worse every time I rode the bike. Both stock Kenda front tires were badly cupped even though I was religious about maintaining 20psi in them. It was a little hard to tell that they were cupped while mounted on the bike but once I removed them and got them out from under the fenders the cupping was readily apparent. I replaced them with Continental ContiProContact 155/60R15. I have since put around 2k on the Continentals and they work fine. I don't notice much difference in handling but the ride quality is so much better. I took the wheels to a Discount tire and they replaced the tires for me but were unable to balance them because of the small diameter of the center hub hole in the wheel, it was too small to fit their balance machine. I took them off the bike to the local Can Am dealer and they balanced the wheels and tires.
 
The first owner of my 2016 RTL had a bad shake in the handlebars and the dealership could not balance the tires to get rid of the shake. They found the OEM Kendas were out of round. They replaced the tires under the BRP warranty. Fixed the problem. This is a known problem with the Kendas!
 
The first owner of my 2016 RTL had a bad shake in the handlebars and the dealership could not balance the tires to get rid of the shake. They found the OEM Kendas were out of round. They replaced the tires under the BRP warranty. Fixed the problem. This is a known problem with the Kendas!
A tire that took this much to maybe balance is not a good tire.
Copped 2.jpg
 
Back
Top