• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

12 Volt dash plug

gbouten

New member
Im going to add a 12 outlet in the area where the analog gauges would normally go. The blanks pop out and can be drilled for them. Is there a 12 volt source in the dash I can get to? I will only be using it to charge my cell phone.
 
Yup, sure is

You can tap into the "Instrument Light" power wire that fed the light. I use it to Power the "Teddy Cam" LCD that I mounted there in place of the ANALOGUE GAS GAUGE that did't work as well as the LCD version anyway's. :thumbup:IMG_20120229_175654.jpgIMG_20120229_175640.jpg2011-11-07 16.07.31-1.jpg
 
The plug originally connected to either of your disconnected gauges contains an Orange (positive) and Black (negative) wire that you can use for your power source to a 12 volt outlet. You may want to attach an in line fuse (3 amps or so) between the switched power source and your 12 volt plug just to be on the safe side. That way if you try to plug in a device with a significant draw this fuse will go before anything else. Don't know if this is absolutely required, but it always pays to err on the cautious side.
 
The plug originally connected to either of your disconnected gauges contains an Orange (positive) and Black (negative) wire that you can use for your power source to a 12 volt outlet. You may want to attach an in line fuse (3 amps or so) between the switched power source and your 12 volt plug just to be on the safe side. That way if you try to plug in a device with a significant draw this fuse will go before anything else. Don't know if this is absolutely required, but it always pays to err on the cautious side.
:agree: Plugging in something like a heated vest could cause a disaster! Use a 3 amp fuse.
 
Nice installf. Always helps to have a switched power 12 volt outlet out front. I rarely use the one in the trunk anymore.
 
Back
Top