-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
2014 RTS Highway Pegs
- Thread starter YellowSub
- Start date
PW2013STL
Active member
I have no expeareance with the Rivco product so you will meed to hear from someone who does.
I have the ones from Lamont ( Spyderpops sells them). I first tried his FBB ones that mount off the floorboard, but with short legs (30" inseam) these made my legs spray out to far.
I then went with the same ones that Spyderpops sells. These work great, but I did get the extended peices that Lamount sells to allow me to have the pegs clear the lower wings on the Spyder. This then allow the pegs to be closer to the Spyder body reducing my leg spread.
For the times that I want to fully stretch out my legs I just rest the back of my boots on the pegs.
I have a set from Lamont and a BRP comfort seat to be installed this week. I am 6'4" and hope this setup lets me stretch my legs out....Mr. Cognac is a little cramped as it is. I ride solo so if I loose passenger room it is not an issue with me.
As an added comment. I am also having my CB and XM radio transferred from my 2011 RT-S (Big Red 1) BUT it requires a different waring harness than the 2011....harness has been received and all will be installed this week.
:spyder2:
As an added comment. I am also having my CB and XM radio transferred from my 2011 RT-S (Big Red 1) BUT it requires a different waring harness than the 2011....harness has been received and all will be installed this week.
:spyder2:
lwrydr
New member
Hiway Pegs
I have had both sets of pegs from Lamonts. The one I like best is the ones that attach to the floorboards on the :spyder2:. They ended up being a little to wide so I had a friend of mine fabricate the bar that mounts from floorboard mount up to where you want the pegs. I really like this setup.
I have had both sets of pegs from Lamonts. The one I like best is the ones that attach to the floorboards on the :spyder2:. They ended up being a little to wide so I had a friend of mine fabricate the bar that mounts from floorboard mount up to where you want the pegs. I really like this setup.
Looks good. I will see how it goes...thanks
Utah Geezer
New member
Pegs
I bought my mounts from Lamont and my pegs from Kurykyn. Love em.
I bought my mounts from Lamont and my pegs from Kurykyn. Love em.
C
CARA @ RIVCO
Guest
Highway Pegs for Spyder RTs, 2012 & Newer
YellowSub: Just to remind, RIVCO's Highway Peg Mounts are made to work with factory floorboards. (See link below) Thanks for the mention, and thinking RIVCO - all our best!
http://www.rivcoproducts.com/products/product.php?productid=878&cat=0&page=1
YellowSub: Just to remind, RIVCO's Highway Peg Mounts are made to work with factory floorboards. (See link below) Thanks for the mention, and thinking RIVCO - all our best!
http://www.rivcoproducts.com/products/product.php?productid=878&cat=0&page=1
I have the same setup They do spread your legs I have a 30 in inseam. I ride most of the time with my heel on the floorboards toes on peg. If I really want too stretch my legs I put them on the pegs. Have a friend that have Ricvo pegs they are closer to the body of the spyder
Bob Denman
New member
Joe, I thought that you had put his FBBs, on the new bike. :dontknow:
My bad!
pps:
My bad!
pps:
trikermutha
Active member
When are the chrome version coming out for the RT models??
C
CARA @ RIVCO
Guest
Thanks for the question Trikermutha! Our new chrome version is available now - #CA004-RTC
Chrome Highway Peg Mount Set for Can-Am Spyder RT, 2012 & Newer with Factory Floorboards - for $199.95. You can order from us online or call for details. Here's a pic and all our best - Happy Holidays from the folks at RIVCO Products
Cruzr Joe
New member
Joe, I thought that you had put his FBBs, on the new bike. :dontknow:
My bad!
What did the Missus tell you about thinking???? :lecturef_smilie::lecturef_smilie::lecturef_smilie:
Cruzr Joe
jaherbst
New member
I have these and love them. No end to adjustments. Chrome looks very good with the RT Limited.
Even a "cave man" could mount them. I think I got the first pair.
Jack
jaherbst
New member
These new Rivco Chrome ones look nice. I bet the Kury chrome widow pegs would look great with them.
They also have chrome anti vibe pegs which I bought to go with them.
Jack
