• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

No Customer accessory circuits on 2026 F3 Ltd? Where/how can I connect accessories?

B

Billaswell

New member
I have recently bought a 2026 F3 Limited Special Series and there doesn't appear to be any customer accessory conecters. The book still says there are 3. So how would you connect up accessories? I did connect a Healtech Thunderbox, but is not working properly. It is intermittent.

Any suggestions would be appreciated.

Thanks in advance.
 
According to SlingMods, this video is accurate for 2024+ F3 Spyders. Right side inside of the A-arm. Plus, it looks like a pretty neat connector setup for powering more than one. And even though the video says something about a 5 amp limit, your owners guide states the customer accessory fuse is 10 amps. See if this fits what you have and your needs.

 
Last edited:
Snowbelt Spyder said:
According to SlingMods, this video is accurate for 2024+ F3 Spyders. Right side inside of the A-arm. Plus, it looks like a pretty neat connector setup for powering more than one. And even though the video says something about a 5 amp limit, your owners guide states the customer accessory fuse is 10 amps. See if this fits what you have and your needs.

Click to expand...
I just verified on mine to be sure (F3T 2024). It's where they said on mine
 
Yep... They've been slowly removing all customer accessory points... For 2026 they are all gone (found that on my 2026 F3-S, also).

You either wire it directly to the battery with a fuse (which is not switched power) or use the connector on the right side behind the battery, which is there only to connect the signature led light... Now the connector is kind of strange (some kind of Delphi/GM connector used for thermostats) , ordered the plug-n-play connector from sling-mods but you need to be careful of what you connect there as it should be rated 5A amp only... I'm going to wire my GPS there, so it shouldn't be a problem...

For BRP I would say, get that 10.25" beautiful display to work properly as a GPS or let us plug our GPS units the way it used to be.
 
You must log in or register to reply here.

Similar threads

J
How do I Connect lights to the Customer Accessory Circuit?
Replies
5
Views
2K
JKMSPYDER
JKMSPYDER
QuasiMotard
Results from Can-Am/BRP engineer conference call
2
Replies
37
Views
14K
KID Ryker
KID Ryker
I
  • Sticky
**** "DO'S & DO NOTS" for NEW SPYDER OWNERS... ****
18 19 20
Replies
388
Views
1M
Peter Aawen
Peter Aawen
Back
Top