• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    No you're right, I did, but before starting the bike that was what was showing. I should have waited before posting.
  2. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    Clean throttle now getting no active faults
  3. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    I did replace the hoses with new OEM hoses. I cleaned the bore around the throttle plates, as it was a bit gummed up and the plates weren’t moving freely, they are now. I wasn’t getting the tap noise when closing, but I am now. Any ideas about how to check for leak at those boots? Also...
  4. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    Getting several codes leading to the P1614 I assume. P0130, P2279, P0136, P1130, and P0106. I did a canister bypass, could it be the cause somehow? Can you direct me to that mod
  5. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    Thank you. Actually there were several codes. I replaced the fuel pump, but was getting P0130, P1614, P2279, P0136, P1130, P0106? I'm assuming it's an air leak which is causing the P1614.
  6. Junior2u

    2010 RTS - unexplained quitting fixed & some Engine mods.

    So you can move the plates with your fingers? Will it cause any harm to the plates by doing this. Would like to clean mine. I’m getting a few codes relating to an air leak. Code P1614 2013 RS 998
  7. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Pretty bad shape, so new hoses and pump to be safe. Tank very clean, no rust. -
  8. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Turns out the hose coming from the the pump to the outlet is split. Confirmed with a micro camera in tank for a visual. So indeed must remove tank for repair.
  9. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Yikes. Guess I’ll be pulling that tank out to inspect pump hoses. Wish me luck. Thanks for the help.
  10. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Seeing bubbles in tank. Is it possibly a split hose on pump assembly. Just enough to seep gas back into tank and not build up pressure, but still enough to sent some through filter?
  11. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Tried both ways dead head test. As well as t between fuel line and filter. Yet still no movement on gauge. Pump is running (3 seconds) and regulator screen is clean and clear. - - Purchased brand new thought the same thing, blew air from compressor works fine
  12. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Tried both ways dead head test. As well as t between fuel line and filter. Yet still no movement on gauge. Pump is running ( 3 seconds) and regulator screen is clean and clear.
  13. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    Hello snowbelt. I have tried the pressure test but going to do it again to see. Will also check all the fuse again. It’s my personal bike last time it ran was about a year ago. Just stop never came back on. Replaced vacuum hoses, spark plugs, oxygen sensor, air filter (K&N) Also added fresh...
  14. Junior2u

    No fuel pressure but fuel is flowing from tank - 2013 RS won't start, any help?

    No fuel pressure but fuel is flowing from tank. Also see movement in tank. 2013 Spyder Rs the regulator is at throttle body did the pinch test still no movement on gauge. Won’t start any help greatly appreciated.
Back
Top