• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. Doc - Riverside

    Un used electrical connectors near headlights

    The square one inserted into the square hole is the connector for hooking it up to the computer for BUDS Diagnostics, you don't want to mess with it. The second 2 pin on is for the solenoid connection for the electric trunk opener which they quit installing on the RT's. It is dead ended in...
  2. Doc - Riverside

    Bum skid LED lights

    I will bet if you turn the key on and then gently press in on the area by the last lit LED the rest will come on. The problem is they tack soldered LED strips together with the new lead free solder which can't handle vibration to well so the joint failed. This is a manufactured defect when they...
  3. Doc - Riverside

    Ordered a luggage rack today

    Just tried to install one for a friend. Had to send it back because it would have warped the trunk plastic. When you receive it set the legs on a flat surface. If all 4 legs contact the surface at the same time it is good to install. The one we got had the top left leg missing the table by...
  4. Doc - Riverside

    Frunk removal question

    Yes the clamp has to be loosen. The rubber duct is dry and a pain to slip off for the first time. When you put it back together apply a thin coat of Dielectric grease to the inside of the duct, it makes it easier to install and remove the next time you remove the Frunk
  5. Doc - Riverside

    Looking for the RT Vent Kit instructions

    Resent you the PDF document that will show you how to install the vents on your RT without the need for the template called out in the 2013 recall instructions.
  6. Doc - Riverside

    2011 RT/SE5 - HCM Filter Bolt TQ's?

    Both filters have the same torque spec. 97 in-lbs.
  7. Doc - Riverside

    Question on the air ducts for a 2012 RTS SM5

    Scoops for your RT Go to your Dealer and complain about the high heat in the glove box/ front seat area. BRP has authorized the Dealer to install the scoops on all 2010- 2012 RTS as a good will install at no cost to you. Other option is to do the install yourself. Send me a PM with your...
  8. Doc - Riverside

    Sena Bluetooth Dongle Question

    You don't need a different cable if the P2 connector is installed It is true that if you have the CB installed you will lose that function and the wired factory headsets. If you have the CB and XM Radio install or just the XM Radio install you do not lose the XM Radio when you depin the CB...
  9. Doc - Riverside

    Sena Bluetooth Dongle Question

    Dongle If the Dongle you are pricing is the SM10 Model yes it will work all you need is the cable assembly to go the dongle mounted in the rear trunk and the radio connector. I have made up several cable assemblies and offer them to members at cost plus shipping. Dongle mounts in the rear...
  10. Doc - Riverside

    2015 RTL dash lights

    Bad news. What you see is what you get.
  11. Doc - Riverside

    2014 RT-S Drive Belt Change (Replacement)

    Installing new belt I just put a new belt on a 2013 RT for a friend. We purchased the belt from PowerSports Warehouse for $239.00. It took about 2 weeks to get the belt. The original belt was tension-ed by me after replacing the tire with a the Sonic Meter. The original belt was damaged and...
  12. Doc - Riverside

    username

    Send a PM to Lamont as to what you want it changed to. He has to do it.
  13. Doc - Riverside

    RT Vent Kit Install???

    RT Vent install Send me a PM with your E-Mail address and I will send you the PDF file Installation Procedure I have provided some 35 other members on doing the Install of the Vents. Also go to www.powersportswarehouse. com to order the Vent Kit (P/N 219800388) they sell it for $50.24.
  14. Doc - Riverside

    2014 hea issues

    Solution to your problem There is a cheap fix that will get rid of the heat. See attached link. http://www.spyderlovers.com/forums/showthread.php?84770-RT-vent-kit-on-2014-RT Send me a pm with your E-Mail address and I'll send you the procedure to install the scoops. Doc
  15. Doc - Riverside

    Charging system display

    Volt/AMP Meter I have this installed on mine. Pictures shown are with the key just turned on. AMP display is what load is on the battery from the computers prior to hitting the start button. You can select voltage or AMP anytime. http://kisantech.com/mag/index.php/chargeguard/cg-25.html
  16. Doc - Riverside

    Laser Alignment and Swaybar

    The Sway Bar for the 2014 and up RT's from Ron comes with the Billet links and the front has to be lifted up by at least 22 inches to get the sway bar out of the channel it is in.
  17. Doc - Riverside

    Laser Alignment and Swaybar

    Rich where are you located in Georgia? If near the eastern side of the state I can help you on both items. PM sent.
  18. Doc - Riverside

    tri-axis

    sent you a PM. Which Boats? Doc ETCS (SS)
  19. Doc - Riverside

    Drain plug Specs

    RT oil plugs The Quick Drain plug will work for the transmission but the drain plug for the engine is quit long and has a set if O-rings installed. To me the O-rings imply that that there may be a secondary oil passage that is located between the two O-rings. You need to find out the reason...
  20. Doc - Riverside

    Laser Alignment & BajaRon Swaybar Good to Go!

    Just North of Jax, take US 1 into Folkston, Ga. I'm 12 miles North of town on River Road.
Back
Top