• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Search results

  1. MakoShark2

    Datatsheet F3 - Ryker side by side

    Being 60mph = 96.7km/h, from the specs 0 to 100km/h => 10.3sec/10.1sec, not 7secs right? Strangely the 600 Ryker is +0.5 faster than the 900 from 0 to 90km/h and the 1/4mi... At a 128kg weight difference the F3-S's Brembo brakes seem to be doing a superb job.
  2. MakoShark2

    Just curious?

    Straight from BRP's online configurator F3/S = SPORT CRUISING F3/T = CRUISER TOURING And the RT might be the LUXURY TOURING. Still to me F3/T and RT seem to compete on the same market segment, and wouldn't be surprise if BRP would let down the Limited package on the F3/T or even the F3/T model.
  3. MakoShark2

    1330cc Questions on F3-S tranny

    Just seen latest video of Shawn Smoak he does speak about the click and how they all do that at 8:02mn Except for the new RT it seems.
  4. MakoShark2

    Installing Baja Ron Sway Bar

    Hi. I've seen this ramps with jacks that lift the wheels up to 45cm/17.7in of height, would this be enough to swap the bars for a F3-S?
  5. MakoShark2

    Installing Baja Ron Sway Bar

    One question... Would rising the Spyder front wheels to 45cm/17.7in of height (rear wheel on the floor) be enough to swap the bars?
  6. MakoShark2

    1330cc Questions on F3-S tranny

    Mine does it, I believe all does. Could be louder or quieter depending on a couple of factors (oil, temp, speed, rpm, how you press the shifter, if you are wearing an open helmet or not). Still I would remove the pulley cover and check for any signs of red dust.
  7. MakoShark2

    1330cc Questions on F3-S tranny

    Took a peek under the pulley cover, no signs of red dust :bowdown: Mine definitely clicks and I do feel the knock on the pegs every time it shifts. Much smoother if I push the paddle gently and keep it press for 1 second. Downshifting is much louder, but I do think it's perfectly mormal. I've...
  8. MakoShark2

    Checking oil on F3... How tricky it can be?

    Pumping oil from the engine was very straight forward and quick (took less than 2min to extract about 100ml each time), I've done maintenance on bikes before and would have probably took more time. Could have just went to him and argue with him to make it right, but i'm more than 1 hour away...
  9. MakoShark2

    Checking oil on F3... How tricky it can be?

    I think it's from here, which actually says "Oil level can be reliably verified when the radiator fans have cycled ON twice" https://www.spyderlovers.com/forums/showthread.php?73737-Proper-Oil-Level-Verification-Procedure-on-1330-engined-Spyders&highlight=level+verification
  10. MakoShark2

    2-Up Question

    I ride 99% of the time two up on my F3S. Mostly one day rides (100mi to 300mi) and one or two long touring trips (+1300mi), and the F3S is just perfect for me. I'll drive it almost all year as cruiser and put the cases only for a longer ride or for touring. Have SHAD side cases and SHAD...
  11. MakoShark2

    Checking oil on F3... How tricky it can be?

    Thanks for the feedback guys. Checked the oil a couple of times on leveled ground after a long ride and letting it idle until the fans turned on... and it's just below the little upper ball (max mark), so I let it be as it is. This confirms the bad judgement of the maintenance guy who likes to...
  12. MakoShark2

    1330cc Questions on F3-S tranny

    Just paid attention on yesterdays ride... There's definitely noise on mine (F3S MY2018), specially for 1 and 2... 3 and above seems to be less noisier but then the engine roar might be just covering the transmission click/clunk noise to my ears. What I've noticed is it does get better if shifted...
  13. MakoShark2

    Changing Headlights to LED - nose piece removal

    I've made a tutorial on how to activating the lowbeams for the F3 (Non US and CA models). Not what you are looking for, but the whole dismantling process to access the headlights is documented there...
  14. MakoShark2

    1330cc Questions on F3-S tranny

    Not sure how to measure the clunk, but mine does it a bit sometimes while shifting, specially under 3500rpm. Still not the same loud clunk when going from neutral to 1st/reverse, but I do notice it. Also it seem to work better going from neutral to 1st then reverse, instead of neutral...
  15. MakoShark2

    Back from the dead...Thank You SpyderLovers

    Great news, nice to know you are recovering well. And if business is good maybe 2020 is right the time to expand overseas :) We really need a proper Lamont's Garage European distributor, not that easy to get your great products here. Shipping and import taxes kind of kills the deal for us...
  16. MakoShark2

    Checking oil on F3... How tricky it can be?

    So got my second oil change (yearly one) at the dealer not long ago. And I think the maintenance guy kind of likes to overfill it... When I got home just check the oil level and it was above the upper marker. So I gradually pumped out about 3.4oz/100ml more or less each time (ride it a bit and...
  17. MakoShark2

    Metal Clunk sound when hitting a hole with rear wheel

    I believe F3Ts and RTs have an air cushion (self inflatable on the RT and F3T-L) which will stiffened the shock.
  18. MakoShark2

    Metal Clunk sound when hitting a hole with rear wheel

    Mine has an aftermarket shock with adjustable rebound. I guess there isn't much you can do when you are going fast and no time to avoid that big hole/lump on the road :/ Oh, and never happened while riding two up (which is 95% of the time for me), I guess that extra load does help to avoid full...
  19. MakoShark2

    Metal Clunk sound when hitting a hole with rear wheel

    Felt that twice today. Riding solo. Also got the impression that the noise came when the shock was fully extended. Have an aftermarket shock on mine (F3S).
  20. MakoShark2

    BRP going electric?

    Been driving an electric car for more than 3 years now, and I wouldn't go back. It's not only a question of environmental matter (which is important of course), electric motors make combustion engines look like something of the past. Mainly, EVs convert about 59%–62% of the electrical energy...
Back
Top